Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[roadrunner]

FYI, I spoke to Mike Allemang (mike@symtec-inc.com) about the Heat Demons for the Wild One bars and they are now available in chrome or black.  He said that he could do a group buy (minimum of 5), or deal with individuals.  Just mention the CVO site and he will give you a discount.  These are not available publicly yet and are only being producted in small quantities (5).  I ordered a set of chrome and will post pics of the install later.  Mikes info below.  Ride Safe!

Mike Allemang
6227 University Ave. NE
Fridley, MN 55432
(763) 571-9193 Office
(651) 260-3180 Cell
(763) 571-9194 Fax

[Twolanerider]

FYI on this.  Very likely only correct for older early production Wild One bars (like mine).  Later bars are tapered and worked for some during the first group buy without alteration.

[roadrunner]

Good info, thats why Mike asked me what the measurement was at the bar bracket!

[Twolanerider]

Good info, thats why Mike asked me what the measurement was at the bar bracket!

Exactly.  The guys with the tapered bars get wider farther toward the center.  Those with the older style are wider farther out to the end.  That's why I had to Dremel the crap (and chrome and pot metal) out of my switch/clamp housing to get a nice contour on it and make it work right.  It's good to know they're actually offering a bolt-on replacement now if I ever need one.

[porthole]

I had zero problems with the kit I just put on earlier this month with the 575's