www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: garage door opener  (Read 1807 times)

0 Members and 1 Guest are viewing this topic.

rekoch

  • Newbie
  • *
  • Offline Offline
  • Posts: 18
  • Sandman
garage door opener
« on: May 31, 2005, 09:21:29 AM »
I hooked up the opener last month when I got the SEEG, and it worked fine for a while, then quit, I moved the receiver from the wall by the switch plate, up to the ceiling by the opener, but no go, anyone have any suggestions?
Logged

hd2003-se2005

  • Guest
Re: garage door opener
« Reply #1 on: May 31, 2005, 09:24:11 AM »
Do you still have power to the receptacle that it's plugged into?


[smiley=nixweiss.gif]
Logged

WFP

  • WoeFully Pathetic!
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5474
  • 2008 Maggie Valley GTG

    • CVO1: WFP-2003 FXSTDSE
    • CVO2: WFP2-2014 FLHTKSE
Re: garage door opener
« Reply #2 on: May 31, 2005, 09:31:20 AM »
Toggle the highs, does the LED flash on the Receiver?

If Yes:  Check the wire connection at the opener.

If No:  Remove the fairing, toggle the high beams while looking at the transmitter.  Verify that the led flashes when you toggle the highs.  

If it does:  Try reprogramming the Receiver/transmitter pair.
If no:  Check the wires/connector to the transmitter

If this does not help...time to call the Service Department.



The Garage Door Opener is the first accessory I recommend to everyone with a garage!

/Bill
Logged
Finally have ridden a Harley in all 50 US States!

Canadian Provinces NOT travelled in or through by Motorcycle (YET!!!):

Lz

  • Newbie
  • *
  • Offline Offline
  • Posts: 23
  • Live Free or Die
Re: garage door opener
« Reply #3 on: May 31, 2005, 05:27:05 PM »
If I remember corectly......the reciever needs to be "so" far away from the door closure motor/reciever...mine's is 12'-15' away from motor & 5ft from floor and works from 200-300 ft away and it took 2 ppl to program it, one to push in the tiny button on reciever the other to program/push high/low switch.  I just followed the directions......and pigybacked the two wires into the open/close button next to the man door. If it's hot you should see the red led lit................gl!
Logged

LETS_ROLL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1344
  • If you're happy and you know it, Punch the Clown!!
Re: garage door opener
« Reply #4 on: June 08, 2005, 11:38:11 PM »
Well my opener won't work.  I plug it on the wall (red light is on), then push the button and the light start to blink.  Toggle the lights but nothing happens.  Any ideas?
Logged
LET'S ROLL
2009 FLTRSE3
2011 FLHXSE2

JCZ

  • Global Moderator
  • 10K CVO Member
  • *****
  • Offline Offline
  • Posts: 23603
    • AZ


    • CVO1: 04 SEEG...sold
    • CVO2: 10 SESG...sold
    • CVO3: 13 FLHTCSE 8
Re: garage door opener
« Reply #5 on: June 09, 2005, 02:23:54 AM »
You may have lost the sendor off of your bike.  It fell off of mine.....they had to replace it.
Logged
Never trade the thrills of living for the security of existence.  Remember...it's the journey, not the destination!

West Coast GTG   
Reno, NV (04), Reno, NV (05),  Cripple Creek, CO (06)  Hood River, OR (09), Lake Tahoe, CA (11) Carmel, CA (14), Ouray CO (15) Fortuna, Ca. (16)

LETS_ROLL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1344
  • If you're happy and you know it, Punch the Clown!!
Re: garage door opener
« Reply #6 on: June 09, 2005, 09:49:58 PM »
Quote
You may have lost the sendor off of your bike.  It fell off of mine.....they had to replace it.

JCZ,  is the sendor in the fairing?  Or how will I be able to tell or check it?  Thanks for the info.  Let's Roll
Logged
LET'S ROLL
2009 FLTRSE3
2011 FLHXSE2

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50583
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: garage door opener
« Reply #7 on: June 09, 2005, 09:59:38 PM »
Quote
JCZ,  is the sendor in the fairing?  Or how will I be able to tell or check it?  Thanks for the info.  Let's Roll


Happened to see this before JC had an opportunity so catching it on the fly.  The transmitter is mounted on the inside of the inner fairing over on the left side (as you're sitting in the seat).
Logged

phattey

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 356
  • It's the journey...

    • CVO1: FLHXSE2
    • CVO2: FLHTCSE2 Sold
Re: garage door opener
« Reply #8 on: June 10, 2005, 09:18:21 AM »
Mine dosen't work either....

Red light comes on, even blinks as I toggle the light switch...but nothing happens to the door.

I've tried all locations in my garage...!!! Nothing...I'll call the dealer on this today...

P
Logged

WFP

  • WoeFully Pathetic!
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5474
  • 2008 Maggie Valley GTG

    • CVO1: WFP-2003 FXSTDSE
    • CVO2: WFP2-2014 FLHTKSE
Re: garage door opener
« Reply #9 on: June 10, 2005, 09:40:17 AM »
Quote
Mine dosen't work either....

Red light comes on, even blinks as I toggle the light switch...but nothing happens to the door.

I've tried all locations in my garage...!!! Nothing...I'll call the dealer on this today...

P



I just added one to my Jeep...Works GREAT!  Installed it, used an extension cord to bring the receiver right next to the Jeep, programmed it...remember to HOLD the programming button....and it worked.  Wired it to the opener...and done.

/Bill
« Last Edit: June 10, 2005, 09:43:32 AM by WFP »
Logged
Finally have ridden a Harley in all 50 US States!

Canadian Provinces NOT travelled in or through by Motorcycle (YET!!!):

MGB

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 88
Re: garage door opener
« Reply #10 on: June 11, 2005, 07:59:38 AM »
Hey all, My door opener doesen't work most of the time just after I wash the bike. After a short ride, it starts working fine. Figure I just got water where it wasn't supposed to be and the ride drys or blows the water out. [smiley=confused5.gif]
Logged
Mike

'78 Vette
'78 Tri. Bonneville
'04 SEEG
'13 Ann. Tri-Glide
'02 883 (wife's)
'04 1200 (wife's)
'12 sWITCHBACK (wife's)

"RIDE WATCHA GOT"

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50583
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: garage door opener
« Reply #11 on: June 11, 2005, 10:49:59 AM »
Quote
Hey all, My door opener doesen't work most of the time just after I wash the bike. After a short ride, it starts working fine. Figure I just got water where it wasn't supposed to be and the ride drys or blows the water out. [smiley=confused5.gif]



That's weird.  The xmitter is a sealed piece, it's in an area that would be tough to get waterlogged anyway.  So I guess I got nothen......  [smiley=nixweiss.gif]
Logged

LETS_ROLL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1344
  • If you're happy and you know it, Punch the Clown!!
Re: garage door opener
« Reply #12 on: June 12, 2005, 02:09:58 AM »
If you're having problems with the garage door opener also check out this thread below .  There is some info. here that might help you fix your problem "hopefully".  My problem was one of the pins was pushed in in the connector so it wasn't making contact.  Hope it helps.  Let's Roll


http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?board=eg_gen;action=display;num=1112811416
« Last Edit: June 12, 2005, 02:15:38 AM by Lets_Roll »
Logged
LET'S ROLL
2009 FLTRSE3
2011 FLHXSE2
 

Page created in 0.231 seconds with 21 queries.