www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: FLHTCUSE3 Front Turn Signal Socket Assy. Replacement  (Read 1253 times)

0 Members and 1 Guest are viewing this topic.

Fly'n Lion

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
FLHTCUSE3 Front Turn Signal Socket Assy. Replacement
« on: August 26, 2008, 12:46:02 PM »
Has anyone replaced the front turn signal socket assy on the FLHTCUSE3? There is no slack in the wires at the turn signal housing at all. Any suggestions?

Thanks
Fly'n Lion
Logged
'07 SECU2 Cherry/Blk
Rinehart True Duals, SERT, "Roll Your Own" A/F

Diesel Dragon

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 173
Re: FLHTCUSE3 Front Turn Signal Socket Assy. Replacement
« Reply #1 on: August 26, 2008, 11:04:41 PM »
I'm not sure which part of the wiring your trying to pull on but if you take off the front fairing you can just unplug the whole turn signal wiring assembly at the connector.

.
Logged
A threesome is not really cheating, the 2 girls cancel each other out :)

The difference between stupidity and genius is that genius has it's limits

08 SE Ultra
03 Fatboy

Fly'n Lion

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
Re: FLHTCUSE3 Front Turn Signal Socket Assy. Replacement
« Reply #2 on: August 27, 2008, 01:59:18 PM »
Quote from: Diesel Dragon on August 26, 2008, 11:04:41 PM
I'm not sure which part of the wiring your trying to pull on but if you take off the front fairing you can just unplug the whole turn signal wiring assembly at the connector.

I was thinking there might be a way to do it without removing the fairing but I went ahead and removed it and now it all makes sense.
Thanks for the reply.
Fly'n Lion
Logged
'07 SECU2 Cherry/Blk
Rinehart True Duals, SERT, "Roll Your Own" A/F
 

Page created in 0.168 seconds with 20 queries.