Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[RickC]

It (the quiet baffle) must as it's a much better sound than what you describe on yours when used on both of mine.  Have it on a 95" in the SERG and the 107" on the SEEG.  Nice throaty growl when you get on either bike and a good low rumble all the rest of the time.  The exhause sounds different on each bike.  More compression on the SEEG.  But it's good on both of them.

Fair enough. Now that I think about it, the high frequency growl that I had might have been due to the 10.5:1 high compression build rather than the pipe.

[Keats]

I cannot seem to find website for D&D?

[Twolanerider]

Fair enough. Now that I think about it, the high frequency growl that I had might have been due to the 10.5:1 high compression build rather than the pipe.

Certainly worth considering as being a cause for the difference.  The 107" is of course a stroker so breathes much differently and is close to but not quite at your CR.  It's about 10.25:1.  The 95" isn't close to that and it is the "deeper" sounding of the two.  It's got more of a growl when twisted while the 107" has more a bark.  Still relatively deep sound but with a shorter crack .  Part of that is also that with the cam package and rest of the build it does most of its work down low and wraps up quickly too.

[Twolanerider]

I cannot seem to find website for D&D?

I looked all over your post and I couldn't find it there either!

Try here :  http://www.danddexhaust.com


                           

[Twolanerider]

I looked all over your post and I couldn't find it there either!

Try here :  http://www.danddexhaust.com


                           

That ^ was dumb .   

[Keats]

Thanks Don, 
If I did have it in my post, I would be worried

[Twolanerider]

Thanks Don, 
If I did have it in my post, I would be worried

If you're considering a set of FatCats or other D&D exhaust several of us have found this vendor to be an excellent source for their products.  Really good guys to work with and they happen to be neighbors to D&D.  So stock is rarely an issue.

http://www.automotivemachine.com

[Black Diamond]

I ordered a set of D&D Fat Cats with the Big Boar Q baffles from www.hdpipes.com. Eric gave me the best price I could find. You might want to contact him. 2 days to my door.

JW

[Keats]

If you're considering a set of FatCats or other D&D exhaust several of us have found this vendor to be an excellent source for their products.  Really good guys to work with and they happen to be neighbors to D&D.  So stock is rarely an issue.

http://www.automotivemachine.com

Thanks don,
I will give them a call.
Jeff

[Twolanerider]

Thanks don,
I will give them a call.
Jeff

Should check the place that JW just cited also.  Haven't checked AMS since I got the set for the SERG.  But the HDPIPES company he linked is a bit less than I paid then.

[Keats]

Should check the place that JW just cited also.  Haven't checked AMS since I got the set for the SERG.  But the HDPIPES company he linked is a bit less than I paid then.

Price is part of the equation, but not the only thing. If information (help) flows easily, My loyalty is not swayed by $50.00
Now $100.00 and I may look the other direction 

[Twolanerider]

Price is part of the equation, but not the only thing. If information (help) flows easily, My loyalty is not swayed by $50.00
Now $100.00 and I may look the other direction 

That part I can speak to on two fronts.  AMS as a vendor was wonderful to work with.  Great on the phone before, during and after.  I'm a one to two day ground ship from them and both times they got parts packed quickly enough that I had them the next day.

D&D itself also proved to be exemplary in their consumer support.  Had a clamping issue with one of the mufflers.  Called to ask about clamping alternatives and before even asked for anything they offered a new muffler.  Shipped it out immediately with no requirement of prior return of the old one.  After mentioning that here a couple others who had a similar clamping issue called the company and got the same level of service. They were excellent to have done business with.

[Black Diamond]

D&D itself also proved to be exemplary in their consumer support.  Had a clamping issue with one of the mufflers.  Called to ask about clamping alternatives and before even asked for anything they offered a new muffler.  Shipped it out immediately with no requirement of prior return of the old one.  After mentioning that here a couple others who had a similar clamping issue called the company and got the same level of service. They were excellent to have done business with.

I contacted D&D directly. Gave them the necessary info on my motor, riding style and what I was looking for. They told me my options. Then I called around and Eric was cheapest. D&D guys were great on the phone and email. Up to you tho! 

JW