Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[quickster]

  How's it going all. Don't have a OM just yet for my Road Glide, and I just need to know the PSI range for the rear stock air shocks. thanks

[Keats]

  How's it going all. Don't have a OM just yet for my Road Glide, and I just need to know the PSI range for the rear stock air shocks. thanks

I think the standard shock operating range is 0 - 30 psi......for most baggers   it is listed in the manual by weight/riders

I think most ride within 5 - 20 psi

[electraglideclyde]

Here's the table from the '06 manual.  I usually ride 15-20 psi and 30-35 psi when loaded.  Hope this helps.

[Fired00d]

Here's the table from the '06 manual.  I usually ride 15-20 psi and 30-35 psi when loaded.  Hope this helps.

Thanks for that I thought I remembered the low profile shocks max was 50 PSI.

 
Ride Safe,
Fired00d
 

[grc]

I believe the SERG has the low profile shocks, so the FLHX spec would apply.  And unless H-D changed something in those shocks, you will probably find that their recommended air pressures are significantly low.  When I set mine per the chart, the shocks bottomed constantly.  For instance, for my weight they called for 0 - 10 psi.  To eliminate the bottoming, I eventually found 18 - 20 psi to work best.  So I would recommend starting at least at the upper end of the H-D recommendation and then adjust to suit your preferences.

Jerry

[quickster]

  thanks folks---I have to get a manual for the bike. I'll be asking lots o' questions till then

[hossdog]

Hey Quickster, when you get your manual you might want to customise it. I don't know how to attach the thread but it was posted on April 14 by Oldwrench in general discussion ( just type in service manual in search ) on how to put your service manuals in a book binder. I did it and the manuals look great. The printing place I went to charged me 11 bucks. Mike

[Fired00d]

Hey Quickster, when you get your manual you might want to customise it. I don't know how to attach the thread but it was posted on April 14 by Oldwrench in general discussion ( just type in service manual in search ) on how to put your service manuals in a book binder. I did it and the manuals look great. The printing place I went to charged me 11 bucks. Mike

Here's the link - Service Manuals. Thanks for reminding me I need to do that w/mine.

 
Ride Safe,
Fired00d
 

[hossdog]

Hey FireDood how'd you do that.   

Here's the link - Service Manuals. Thanks for reminding me I need to do that w/mine.

 
Ride Safe,
Fired00d
 

[FNGw/08SERK]

Hey FireDood how'd you do that.   

The Dooderator is all things informational but do not ask how!!! None of us do 

[hossdog]

Thanks , I just thought I was stupid or something.

[Capo]

I believe the SERG has the low profile shocks, so the FLHX spec would apply.  And unless H-D changed something in those shocks, you will probably find that their recommended air pressures are significantly low.  When I set mine per the chart, the shocks bottomed constantly.  For instance, for my weight they called for 0 - 10 psi.  To eliminate the bottoming, I eventually found 18 - 20 psi to work best.  So I would recommend starting at least at the upper end of the H-D recommendation and then adjust to suit your preferences.

Jerry

I found my SERK to ride best even solo with at least 20 psi

[Fired00d]

Hey FireDood how'd you do that.   

That's why Naitram pays me the big bucks ($0.00).

You want to know how I found it or how I did the hidden link?

1. How I found it was using your search criteria (name of the thread, section it was in, and the person that created it). Service Manuals/General Discussion/Old Wrench.

2. The code I used to make it hidden once I found the thread looks like this...

Code: [Select]

[url=URL goes here]Link[/url]
When you put the URL (http://www.cvoharley.com/smf/index.php?topic=22362.0) in that code where it says "URL goes here", and put the subject "Service Manuals" where it says "Links" it will appear as this...

Service Manuals

 
Ride Safe,
Fired00d
 

[Fired00d]

Should have added this to above post. This is how the code would look for that link...

Code: [Select]

[url=http://www.cvoharley.com/smf/index.php?topic=22362.0]Service Manuals[/url]
 
Ride Safe,
Fired00d
 

[quickster]

Thanks a bunch. My brain is currently wired for Shovels; I'm in the process of downloading info on Twin Cams. It's funny, all the articles on TC's in the mags that I've looked at for years--I can't remember a damn one.