Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[napalm]

Was riding my 2008 SEUC yesterday...made a right turn out of a HD Dealership and fifty feet later the bike quite....dead.  Would not start.  I pushed it back to the dealer....after trying numerous things they found out that the ECM main breaker had blown.....have not found out the case yet....any ideas?

I just had the product enhacement done a week prior and have put about 150 miles on the bike.  I am having starting issues...crank the starter and get those grinding noises....

Help. any ideas?

napalm

[hard10]

Bummer. Wish I knew how to help.

[sadunbar]

Was riding my 2008 SEUC yesterday...made a right turn out of a HD Dealership and fifty feet later the bike quite....dead.  Would not start.  I pushed it back to the dealer....after trying numerous things they found out that the ECM main breaker had blown.....have not found out the case yet....any ideas?

I just had the product enhacement done a week prior and have put about 150 miles on the bike.  I am having starting issues...crank the starter and get those grinding noises....
Help. any ideas?

napalm

Does your bike have a SERT?  If so, make sure the ACR's are turned on in the software...  If you don't have a SERT, make sure they plugged in the ACR's when they did the "product enhancement".

[sadunbar]

Was riding my 2008 SEUC yesterday...made a right turn out of a HD Dealership and fifty feet later the bike quite....dead.  Would not start.  I pushed it back to the dealer....after trying numerous things they found out that the ECM main breaker had blown.....have not found out the case yet....any ideas?
I just had the product enhacement done a week prior and have put about 150 miles on the bike.  I am having starting issues...crank the starter and get those grinding noises....
Help. any ideas?

napalm

If the wiring for the ACR's short, it will take out the ECM fuse.  They replaced the ACR's when doing the product enhancement.  If they didn't route the ACR wiring properly and they shorted, it could explain both problems...