Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tlr]

ah, got it.  Now I see what is needed.  Thanks very much.  I like this solution alot.  Just need the bike.

[Iglide]

Let's start over, got all the boxes out:

Adjustable Highway Peg Mounting Kit- Short Angled                          50830-07
Assy Rumble Footboard, Psngr        (insert)                                     51510-09
Assy Rumble Footboard, Psngr        (insert)                                     51502-09
Kit, Passenger Footboard               (pans)                                      50357-04
Chrome Footboard Brackets            (pan mount to frame)                  53070-00

Service parts not included in kits above:
Pivot Pin (4) needed   50933-86
Ball (2) needed          8860
Spring (2) needed      33085-74

And the FLTRSE service manual is:   99600-09

As the service parts are small I picked up an extra of each, all my stuff seems to get lost or launch into a dimension never to be found again.

Plz double check all listed parts as I have done my best to replicate what I have used in my particular application.

[Guilty]

Let's start over, got all the boxes out:

Adjustable Highway Peg Mounting Kit- Short Angled                          50830-07
Assy Rumble Footboard, Psngr        (insert)                                     51510-09
Assy Rumble Footboard, Psngr        (insert)                                     51502-09
Kit, Passenger Footboard               (pans)                                      50357-04
Chrome Footboard Brackets            (pan mount to frame)                  53070-00

Service parts not included in kits above:
Pivot Pin (4) needed   50933-86
Ball (2) needed          8860
Spring (2) needed      33085-74

And the FLTRSE service manual is:   99600-09

As the service parts are small I picked up an extra of each, all my stuff seems to get lost or launch into a dimension never to be found again.

Plz double check all listed parts as I have done my best to replicate what I have used in my particular application.

I put on all of the same parts with the exception of the chrome footboard brackets and I did not need to purchase the pivot pins, balls and springs separately. I used the adjustable chrome passenger footboard mount brackets, part# 50768-07.

[Iglide]

Great post Guilty,

They charged me an extra $ for those small parts....

[planenut]

looks good,you just needed a ultra glide and you would had the best of both     now it looks as fast as it is,how has it been since the tune?

jon

[Iglide]

It's a BAD BOY Nut,

You can't imagine how it corners at 20-30mph over with that fairing mounted to the frame   

It's tough enough at 3000-4500 RPM, makes for some quick shifting but.... you run highway mostly in 5th and then there is all that overage when you rip it up to 4500 and shift to 6th. It's gonna take a bolt in cam and some adjustables but I believe that an extension of that power band to 5500 is doable. I am chewin on it as a winter project.

[roady]

I put on all of the same parts with the exception of the chrome footboard brackets and I did not need to purchase the pivot pins, balls and springs separately. I used the adjustable chrome passenger footboard mount brackets, part# 50768-07.

Guilty,
I am using the adjustable footboard mounts as well. So do I need the springs, ball, and pivot pins with going that route?

Thanks
Mike

[Hoist!]

Guilty,
I am using the adjustable footboard mounts as well. So do I need the springs, ball, and pivot pins with going that route?

Thanks
Mike

Those allow the board to mount and pivot on the adjustable bracket. You still need these parts, unless they came with your bracket.

Hoist!

[Guilty]

Guilty,
I am using the adjustable footboard mounts as well. So do I need the springs, ball, and pivot pins with going that route?

Thanks
Mike

As I said, I ordered the same parts with the exception of the adjustable footboard mounts and I did not have to order the pivot pins, balls or springs separately. Honestly, I don't remember what box they came in but I think the pivot pins, balls and springs were packaged with the adjustable footboard mount brackets.

[roady]

Guilty,

I ordered the same set up as you so I should be good. I will let you know for sure this weekend. I should have everything tomorrow.

Thanks again

[Hoist!]

As I said, I ordered the same parts with the exception of the adjustable footboard mounts and I did not have to order the pivot pins, balls or springs separately. Honestly, I don't remember what box they came in but I think the pivot pins, balls and springs were packaged with the adjustable footboard mount brackets.

I believe you're correct. I don't remember having to order the balls and pivot pins separately either.

Hoist!

[Twolanerider]

Might just be lack of comparison or optical illusion somehow.  But is that brake pedal pad larger than the common pads we've used for years.  Depending on your air cleaner a pad that hung outboard a little farther could be a good thing.

[SBB]

They are bigger!

 

[Twolanerider]

They are bigger!

 

Up and down or out to the side too? 

[SBB]

Up and down or out to the side too? 

Left to right and top to bottom.
HMMMMM thickness seems about the same!