www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Thundermax ECM error question  (Read 3475 times)

0 Members and 1 Guest are viewing this topic.

roadrunner

  • Tennessee Squire
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 811
  • "I'm gonna see a man about a dog!"

    • CVO1: 2015 FLHRUSE
    • CVO2: 2004 FLHTCSE (Sold)
Thundermax ECM error question
« on: October 23, 2008, 11:47:48 AM »
I've got an email in to zippers regarding an EGO front and rear error in the diags section of the smartlinkIV software, was wondering if anyone had seen this error. Thanks! 

EGO Front / Rear = Oxygen Sensor Front / Rear Status – The engine must be operating for this function to correctly diagnose the oxygen sensors.

I'll have to run the bike and see what I get.

Upgraded the firmware from 4.6 to 4.8, cleared all settings, and loaded and saved the original map for the bike.  Only get the EGO front and rear errors under diags when bike is linked, no errors when the bike is running.  Fr & Rr AFR 19.36.  Sent email to Zippers to see what they have to say. Ride safe (and warm)!

Zippers sent me a new map and told me that its normal to get the error with the linked and engine not running.

Will load the new map and see!
« Last Edit: October 28, 2008, 11:39:26 AM by roadrunner »
Logged
2015 FLTRUSE
Clearview GP 12", Fullsac DX, 2.25 power cores with screen and TTS Tune.

lv2ride56

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 97
Re: Thundermax ECM error question
« Reply #1 on: October 31, 2008, 05:38:30 PM »
I started getting this trouble code right after the factory "enhancement" including new heads and ACRs were installed.
Engine light comes on during every ride since and codes are the same P0131 and P0151. Zippers responded with how to check the sensors. I did and they are fine.
I think the new heads and/or ACR's are the problem but have no way to check them.
Just what does O2 sensor low mean anyway
Logged
Patriot Guard Rider

Hoist!

  • Monster
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 21634
  • This chit ain't ROCKET SCIENCE!!!!

    • CVO1: '07C FLHRSE3, BLACK ICE OF COURSE, CUSTOM 110" TC 6-SPEED +++, "CYBIL"!!!
    • CVO2: '99 FXR3 BRIGHT & DARK CANDY BLUE W/FLAMES, STAGE II 80" EVO 5-SPEED +++, "JOY"!!!
    • CVO3: 4: & 5: '85 FXWG BLACK w/CUSTOM FLAMES, 110" EVO 6-SPEED +++ CVO style!!!; '08 NSMC PROSG CUSTOM FXR BASED PRO STREET BLACK, 89" EVO 5-SPEED, VERY FAST!!!; '09 NSMC HSTBBR CUSTOM RIGID HOISTBOBBER, SILVER METALFLAKE BATES SOLO SEAT & TIN w/BLACK WISHBONE FRAME, 80" EVO (w/Shovelhead bottom end) 4-SPEED! VERY COOL!!!
Re: Thundermax ECM error question
« Reply #2 on: October 31, 2008, 05:49:30 PM »
Quote from: lv2ride56 on October 31, 2008, 05:38:30 PM
I started getting this trouble code right after the factory "enhancement" including new heads and ACRs were installed.
Engine light comes on during every ride since and codes are the same P0131 and P0151. Zippers responded with how to check the sensors. I did and they are fine.
I think the new heads and/or ACR's are the problem but have no way to check them.
Just what does O2 sensor low mean anyway

Did they reuse the Zipper's Bosch O2 WB sensors or put the HD NB's back on? Just curious. Make sure you have the right O2 sensor on. Other than that, there's nothing else I can offer you regarding your TMax issue.

Hoist! 8)
Logged
"We wanna be free to ride our machines without being hassled by The Man!"

Traxxion Dynamics Suspension Rules! "It ain't braggin' if you can back it up!"

"Cause I'm sitting on top of the world!" (zoom in on satellite map in my Profile)

lv2ride56

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 97
Re: Thundermax ECM error question
« Reply #3 on: October 31, 2008, 06:43:55 PM »
No, No!! Dealer doesn't know I run the T-Max as they have red flagged anybody with one effectively ending any warranty work from them.
Logged
Patriot Guard Rider
 

Page created in 0.212 seconds with 20 queries.