Topic: Who have these parts mounted ? TC Billet Push Rod & Lifter Block (Read 4297 times)

Twolanerider · « **Reply #30 on:** March 21, 2009, 05:47:19 PM »

Quote from: bisounours on March 21, 2009, 04:54:28 PM

HHmmmmm !
Perhaps my tech was not enthusiastic to mount these parts ?

Not a big surprise a shop tech would not rush to do this Jacques. In their world things either fit or they don't fit. They're not trained nor paid to improvise; even when it's obvious or simple.

bisounours · « **Reply #31 on:** March 24, 2009, 01:27:07 PM »

So, I've made the measurements (sorry in millimeters)

For the first part :
It made 15 mm and we've only 13.5 to 14 mm.

For mounting it's necessary to gring the side of the cylinder.

bisounours · « **Reply #32 on:** March 24, 2009, 01:29:13 PM »

The high of the same parts is 22 mm (stock is ~17 mm)

Need to grind the cylinder....

bisounours · « **Reply #33 on:** March 24, 2009, 01:31:08 PM »

and the last had 26.5 mm of diameter (Stock is 21 mm)

As Don says with his pic, need to grind the part or the cylinder.....

bisounours · « **Reply #34 on:** March 24, 2009, 01:34:12 PM »

Conclusion : not enough room , need 1 to 2 mm more .

Not a big job but for a Tech, it's not possible because it's not plug and play

Twolanerider · « **Reply #35 on:** March 24, 2009, 07:15:55 PM »

Sorry Jacques. This is too bad as those pieces are a nice looking addition.

How does the bike run out now with the rest of the work done?

bisounours · « **Reply #36 on:** March 25, 2009, 04:44:02 AM »

I agree with you, Don, these parts have a nice looking.
Now, it'll be for the next winter, when I'll mount myself.

Concerning the rest of the work, it's not really an improvement without the right MAP.
I've put a request in the MAP's thread but nobody send an answer.
Without a right basemap, it's difficult and I've not a good tuner in my area.

For my '07, it was better with the TMAX auto....

Jacques

Author Topic: Who have these parts mounted ? TC Billet Push Rod & Lifter Block (Read 4297 times)

Twolanerider

Re: Who have these parts mounted ? TC Billet Push Rod & Lifter Block

bisounours

Re: Who have these parts mounted ? TC Billet Push Rod & Lifter Block

bisounours

Re: Who have these parts mounted ? TC Billet Push Rod & Lifter Block

bisounours

Re: Who have these parts mounted ? TC Billet Push Rod & Lifter Block

bisounours

Re: Who have these parts mounted ? TC Billet Push Rod & Lifter Block

Twolanerider

Re: Who have these parts mounted ? TC Billet Push Rod & Lifter Block

bisounours

Re: Who have these parts mounted ? TC Billet Push Rod & Lifter Block