Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Buffy]

OK, I know that this isn't everyone's cup of tea, but a friend of mine added floorboards to his Dyna and I am always impressed at someone who takes a chance trying to improve their scooters.  Here are HIS words on how he did it...


Here is some info on boards for the Dyna.The boards are from JCWhitney,item#-cbu010306  (adj driver floorboards).The mounts are Harley p/n-50900-72ta (foot peg supports).Also equiv mounts are available from a local bike shop.I used 1"x1/4" flat stock for the base mount.About $140 for the parts,$10 to get the foot peg mounts welded onto the flat stock.
There are tabs on the Dyna frame that were used for Police models using floorboards that have what appear to be threaded holes,THEY ARE NOT THREADED..They take 3/8-16 self tapping screws with Allen heads that are available from H-D dealer..p/n-3214.
 
I tried using stock forward control foot peg mounts but even with all the adj parts the boards seemed too high and close to the crash bar.With these brackets  the boards are lower and match up to stock pegs.One caution if you corner aggressively you might drag a board and the right side will only fold up a slight amount because of the exhaust.....
Another choice for boards would be to convert to Police style mounts,brake and shifter from H-D,,see Dyna Police parts manual 99544-03 at a Harley dealer.This much more expensive.....

[JCZ]

02 and early 03 they still made floorboard brackets for Dynas.  If you get lucky, you can still find a pair.

There are other options out there, though.  The Dyna that Terrie just traded in had Kuryaken passenger floorboards turned around backwards and put on the front of her 04 dyna.