www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: WOOD PERFORMANCE Air filters  (Read 1096 times)

0 Members and 1 Guest are viewing this topic.

serghaven

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 309
WOOD PERFORMANCE Air filters
« on: December 06, 2008, 04:16:32 PM »
Anyone use these? A guy at the dealer today was talking about how good they are. Thought I would ask the pro's.  :2vrolijk_21:
Logged

jfh

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 679

    • CVO1: FLTRSE3
Re: WOOD PERFORMANCE Air filters
« Reply #1 on: December 06, 2008, 05:43:16 PM »
I've used the KF325 (340 cfm) on a 120" Merch motor. It required the use of an 8" round air cleaner cover.  They are basically a K&N with a larger element that protrudes further out from the motor. Most have a reverse cone effect where the bigger diameter is furthest from the backing plate. The higher the flow rating, the further it protrudes from the motor. Zipper's offers a very similar product. At the end of the day the largest ones probably flow more air than your motor can use.
« Last Edit: December 06, 2008, 05:45:53 PM by hdfr120 »
Logged
Hammer - CVO Member #641

2009 FLTRSE3: Axtell jugs, JE forged flat top pistons, S&S 585 cams, SE 58mm TB, Dewey's Pro-Street porting, SE cam plate, Zipper's tapered pushrods, Cat-less, 2" Fullsac, TTS, Twin Jagg oil coolers, AK-20, 13" Works Black Trackers w/ARS, Clearview, Hawg Wired, Yaffe Monkey Bars, Danny Gray Big Seat

serghaven

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 309
Re: WOOD PERFORMANCE Air filters
« Reply #2 on: December 06, 2008, 05:56:14 PM »
Thanks hdfr.
Logged
 

Page created in 0.314 seconds with 20 queries.