www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Carry Over  (Read 1251 times)

0 Members and 1 Guest are viewing this topic.

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Carry Over
« on: December 30, 2008, 04:49:55 PM »
 Had some oil in the A/C and the oil level is good so decided to do some mods to the A/C and vent the breathers to ground and get rid of the stuff I do not want to go into my engine. Took some Pics of the mods. sorry if this has been posted before.  Doc

In this one I drilled and taped the breather to the intake with 1/4 x 20 set screw using red lock tite it should never come out.
Logged

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: Carry Over
« Reply #1 on: December 30, 2008, 04:55:46 PM »
In this one drilled and taped for a 3/8npt x 1/4" nipple. Secured with PTS.
Logged

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: Carry Over
« Reply #2 on: December 30, 2008, 04:58:38 PM »
In this one the 1/4" vacume hose is installed to the front via a 1/4" y plastic connector/
Logged

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: Carry Over
« Reply #3 on: December 30, 2008, 04:59:53 PM »
Plumed in and headed out
Logged

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: Carry Over
« Reply #4 on: December 30, 2008, 05:00:53 PM »
and where it ends.  Thanks Doc
Logged

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: Carry Over
« Reply #5 on: December 31, 2008, 05:44:20 AM »
I was looking back and came across this pic from Iglde. When I was doing my A/C mods I realized I did not have the black plate that hides the wires and throttle motor, Anyone else see this on their 09 bike, I have a Nov. build date , wonder if they did a running change?  Thanks Doc
Logged

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: Carry Over
« Reply #6 on: December 31, 2008, 06:46:15 AM »
Question for those that have had thier A/C off, What does this plate do and what is it attached to, and is it needed?  Thanks Doc
Logged

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: Carry Over
« Reply #7 on: December 31, 2008, 07:00:33 AM »
Looking at this black plate now, I do not believe my A/C mod would work the way I have it, would have had to go over to top of the A/C.   Doc
Logged

AXIL

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2579
Re: Carry Over
« Reply #8 on: December 31, 2008, 08:10:24 AM »
 found a maxi pad stuck on the in side bottom of an a/c cover on a sportster once.   :nixweiss:      axil     
Logged
I CAME INTO THIS WORLD WITH NOTHING AND I GOT MOST OF IT LEFT  
AHH,MOONSHINE THE OTHER WHITE MEAT

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: Carry Over
« Reply #9 on: December 31, 2008, 08:33:10 AM »
The plate is part of the Heavy Breather kit.  It does not come standard on the SERG factory breather.
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: Carry Over
« Reply #10 on: December 31, 2008, 10:57:04 AM »
Thank you thats a relief.  Thanks Again Doc
Logged
 

Page created in 0.208 seconds with 21 queries.