Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[skreminegul07]

Can someone please lookup the part numbers for the stock pullback risers on the FXR2, FXR3?  Also verify that the top clamp is 56074-96.

Thanks

[Hoist!]

Can someone please lookup the part numbers for the stock pullback risers on the FXR2, FXR3?  Also verify that the top clamp is 56074-96.

Thanks

FXR3:
Lower Left Clamp 56068-82
Lower Right Clamp 56067-82
Upper Clamp 56003-99A

Hoist!

[skreminegul07]

FXR3:
Lower Left Clamp 56068-82
Lower Right Clamp 56067-82
Upper Clamp 56003-99A

Hoist!

So much for just changing the risers out.  I'm trying to get some pullback without changing cables, etc.  Those three parts will probably cost as much as Wild1 drag bars if still available. 

Thanks

[FXR2evo99]

woha boy.....wheeewwww for a second I was thinkin Howie since he is sorta partial to these for pull back that he would be providing part numbers for these.....:

Regards,

Tim

[NOTE: Please remember that putting your cursor next to the paper clip icon below the photo will allow you to enlarge the photo plus save it to your computer if you desire OR if you merely wish to see it enlarged simply put your cursor on the photo and "LEFT" click and it will enlarge]

[Hoist!]

woha boy.....wheeewwww for a second I was thinkin Howie since he is sorta partial to these for pull back that he would be providing part numbers for these.....:

Regards,

Tim

[NOTE: Please remember that putting your cursor next to the paper clip icon below the photo will allow you to enlarge the photo plus save it to your computer if you desire OR if you merely wish to see it enlarged simply put your cursor on the photo and "LEFT" click and it will enlarge]

HeHe!!! While a lil tall for me, and the color being off and all, I STILL LOVE THAT PIC Tim!!!

Healthy and Happy New Year to ya Tim!!!

Hoist!

[fxr4mikey]

So much for just changing the risers out.  I'm trying to get some pullback without changing cables, etc.  Those three parts will probably cost as much as Wild1 drag bars if still available. 

Thanks

on my '4'  I was not able to get the pull back that I wanted without changing the cables and extending the wiring ..... and even then I didn't get the bars as far back as I'd like to have them.
I'd put 'real' pull back risers on the bike if it weren't for the electronics in the bar clamps and the shield on the front and back of the risers hiding the wiring.
I do however like the bars that I have on the bike. I've been riding with them since 2001 or 2002, I'm old and forget the years easily......... whuts up wit dat      

[skreminegul07]

FXR3:
Lower Left Clamp 56068-82
Lower Right Clamp 56067-82
Upper Clamp 56003-99A

Hoist!

How about the FXR2/3 top chrome cover that has 2 screws attaching it to the top triple tree cutout around the riser base?  Officially caller the "bracket upper cover" The FXR4 part has a larger hole to allow for the closed in riser.  I'm thinking that's where I'm going to relocate the dash indicators from the top clamp.

Thanks