Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Sundog1258]

Anyone know which exhausr gasket works best with Rinehart true duals?  I have a set of SE gaskets , but no instructions from rinehart.
Phil

[hd-dude]

The thinner SE gaskets are fine

[Buffy]

I think I used James Gaskets.  They're thinner too.

[Hoist!]

I use these, Novello Copper Exhaust Gaskets, P/N H26-010.

http://www.denniskirk.com/1/1/135195-novello-performance-exhaust-port-gaskets-ph26010.html

Hoist!

[AXIL]

  I used the small s/e gaskets with my thunder header but i had to use two gaskets on each head to get a good

  seal.                       axil

[hd-dude]

  I used the small s/e gaskets with my thunder header but i had to use two gaskets on each head to get a good

  seal.                       axil

LOL ....I gave up using the thinner gaskets on the Thunder Header pipes, They never seem to line up square into the head, fit on them is all over the place. The standard tapered gaskets are all I use on them....

[REGGAB]

Accel HD EVO Race Style Exhaust Gasket  10 pack.  Part Number:  38070.

[AXIL]

HD-DUDE, i hear ya on the thunder header fitment but my heads have very open ports and the stock gaskets           
 (which i like) would cover some of the port. so i had to use two s/e gaskets.   axil

[hd-dude]

HD-DUDE, i hear ya on the thunder header fitment but my heads have very open ports and the stock gaskets           
 (which i like) would cover some of the port. so i had to use two s/e gaskets.   axil

I have had this concern before on ported heads, I'll have to try doubling the SE gaskets

[AXIL]

HD-DUDE, .   axil