Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Wildrat]

Can someone tell me what the oil pressure is on the bikes after 2006 at idle hot and cold?

Thanks!

[bisounours]

Good morning,

Put a "search" with Oil pressure and you'll found many topics on this subject.

For example : http://www.cvoharley.com/smf/index.php?topic=27173.0

Jacques

[Wildrat]

Good morning,

Put a "search" with Oil pressure and you'll found many topics on this subject.

For example : http://www.cvoharley.com/smf/index.php?topic=27173.0

Jacques

Well the link you put there Care Bear has nothing to do with my question.


Can someone tell me what the oil pressure is on the bikes after 2006 at idle hot and cold?

[Boatman]

Can someone tell me what the oil pressure is on the bikes after 2006 at idle hot and cold?

Thanks!

The 1999-2006 Twin Cams should be the same in the Touring bikes.  If your gauge moves 0-10 PSI at idle and around 35 PSI at 3,000 rpm's..  This is engine fully warmed up, values will be slightly higher cold.

In 07 they went with the new hydraulic tensioners and oil pump in the 07's and later engines.  Still around 10 PSI at idle and 40-45 at 3,000 rpm's fully warmed up.

Hope this helps.

[Wildrat]

Well that answer is a lot closer to what I would like to know. My o6 SG when it gets hot, hot at idle the oil pressure will drop so low that if I did not keep the engine revved or turned off the oil light will start coming on. I an told by members here that this issue has been cured with the new cam plate on 07's up. I want to know if it is fixed then what is the pressure at idle when the motor is getting hot, hot, hot. I will eventually get the info I am looking for but I may have to call in a dentist.