Hi All
Just a peice of information for anyone thinking of fitting this cover.
Having fitted the chrome inner primary cover and liking the look, decided to fit the cylinder base cover to finish off the chrome look.
Came to fit it this morning and discovered the socket head screw supplied with the kit is too short. This screw replaces the centre crank case bolt between the cylinders(yes the one they have revised and fitted an o-ring as part of the product enhancement). The screw supplied is 3 1/2 inch long(roughly the same as the standard bolt). Problem is there is a mounting 'bracket' that has to be fitted using this screw which leaves it too short
. Length of the screw needs to be 4 1/8 inch long. Not a problem as I will pick up a longer screw next week. Thought this info might be useful so if anyone else is going to fit this cover they can get the longer bolt before they try and fit it. This is on a FXSTSSE 2007.
Jon