Topic: Spoiler Lights (Read 7862 times)

SE-Randy · « **on:** March 23, 2009, 10:45:00 PM »

My SEEG2 came with spoiler lights on the tour pak and saddle bags. Currently they only function as brake lights. I would like to have them work as turn and brake lights. Is there a way to do this without cutting in to the wiring harness?

Thanks for any help,

R

hd-dude · « **Reply #1 on:** March 23, 2009, 11:57:11 PM »

depends on how they are wired in. If its done per the instructions no. you can get a run / brake / turn model and splice into that so your not cutting into the bikes harness.

SE-Randy · « **Reply #2 on:** March 25, 2009, 09:04:16 AM »

Is that the module that turns the turn signals in to turn/brake lights?

hd-dude · « **Reply #3 on:** March 25, 2009, 09:14:06 AM »

Quote from: SE-Randy on March 25, 2009, 09:04:16 AM

Is that the module that turns the turn signals in to turn/brake lights?

Yes

Grizzly · « **Reply #4 on:** March 25, 2009, 09:31:58 AM »

Hey SE Randy,

Please let us know when you've completed and how difficult/easy it was... I was thinking of doing the same thing.

Good luck with it.

Thanks!
Grizzly

SE-Randy · « **Reply #5 on:** March 25, 2009, 09:49:40 AM »

Quote from: Grizzly on March 25, 2009, 09:31:58 AM

Hey SE Randy,

Please let us know when you've completed and how difficult/easy it was... I was thinking of doing the same thing.

Good luck with it.

Thanks!
Grizzly

Sure will, I'll take some pic to boot.

SE-Randy · « **Reply #6 on:** March 25, 2009, 10:24:50 AM »

Quote from: Grizzly on March 25, 2009, 09:31:58 AM

Hey SE Randy,

Please let us know when you've completed and how difficult/easy it was... I was thinking of doing the same thing.

Good luck with it.

Thanks!
Grizzly

Grizzly
I am thinking this is the part that will fit your bike http://chicagoharley.com/shop/product_info.php?products_id=67903.

Grizzly · « **Reply #7 on:** March 25, 2009, 12:43:10 PM »

Thanks Randy,

I look forward to seeing the finished project.

Take care,
Grizzly

porthole · « **Reply #8 on:** March 25, 2009, 12:46:49 PM »

Randy - did you get the parts list I posted on anther thread for your tour pak parts?

SE-Randy · « **Reply #9 on:** March 25, 2009, 02:55:49 PM »

Yes I did

Thanks! I will be ordering it next week. Not sure how long the tour pak will take. As long as I get it in time for Sturgis.

Thanks again!

porthole · « **Reply #10 on:** March 25, 2009, 05:02:24 PM »

painted parts can take anywhere from 2-3 weeks to 8-10 months. Tour Paks seem as though they are on the shorter end of the time frame.

Double check the numbers, but they should be good for you.

SE-Randy · « **Reply #11 on:** March 26, 2009, 09:02:17 AM »

I will confirm the numbers when I order and thanks again!

SE-Randy · « **Reply #12 on:** March 29, 2009, 04:41:33 PM »

Grizzly,
I installed the module today, very easy. The connector is located under the seat on the 05SEEG. Only down side is this is after the point where the harness splits for the spoiler lights, so they still function as before, as brake lights only.

SE-Randy · « **Reply #13 on:** March 29, 2009, 04:42:53 PM »

Module itself

SE-Randy · « **Reply #14 on:** March 29, 2009, 04:44:11 PM »

The connector attaches to this clip to hold it in place. It just slides on and clicks in place.

Author Topic: Spoiler Lights (Read 7862 times)

SE-Randy

Spoiler Lights

hd-dude

Re: Spoiler Lights

SE-Randy

Re: Spoiler Lights

hd-dude

Re: Spoiler Lights

Grizzly

Re: Spoiler Lights

SE-Randy

Re: Spoiler Lights

SE-Randy

Re: Spoiler Lights

Grizzly

Re: Spoiler Lights

porthole

Re: Spoiler Lights

SE-Randy

Re: Spoiler Lights

porthole

Re: Spoiler Lights

SE-Randy

Re: Spoiler Lights

SE-Randy

Re: Spoiler Lights

SE-Randy

Re: Spoiler Lights

SE-Randy

Re: Spoiler Lights