Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Super Sert Disc Needed  (Read 662 times)

0 Members and 1 Guest are viewing this topic.

BK

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 281
Super Sert Disc Needed
« on: April 20, 2009, 09:32:10 AM »

I lost my SE Pro Race Tuner Disc. Does any know were I can down load a copy or if some one has one they don't need.
« Last Edit: April 20, 2009, 12:40:48 PM by BK »
Logged

BK

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 281
Re: Super Sert Disc Needed
« Reply #1 on: April 20, 2009, 08:03:11 PM »

Found the disc. :drink:
Logged

ronw48

  • Newbie
  • *
  • Offline Offline
  • Posts: 25
  • 2010 Limited - 2008 Nightster
Re: Super Sert Disc Needed
« Reply #2 on: April 20, 2009, 08:26:39 PM »

Is it the 09 version?  I bought the se pro race tuner, cables and software, but they gave me the 08 version of the software and it doesn't work.  I'm looking for a copy of the 09 verison.  I've got an 09 Ultra with a stage II (103) kit, except I changed the cam to an se 211, and it needs more tuning than the dealer did with his map.
Logged

BK

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 281
Re: Super Sert Disc Needed
« Reply #3 on: April 21, 2009, 08:55:50 AM »

It is the 08 Version. Go into the set up and update the firm ware. That should allow it to work on the 09.
Logged

ronw48

  • Newbie
  • *
  • Offline Offline
  • Posts: 25
  • 2010 Limited - 2008 Nightster
Re: Super Sert Disc Needed
« Reply #4 on: April 21, 2009, 05:36:50 PM »

Tried that several times.  It still won't recognize the tuner.  That's not quite true.  It recognizes that it is connected to the bike but will not show any information from the bike.  Nothing in system info, nothing in diagnostic codes, and will not activate the tuner for recording data, and will not update the tuner.
Logged

BK

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 281
Re: Super Sert Disc Needed
« Reply #5 on: April 23, 2009, 02:52:07 PM »

It's been over a year since I used mine. here is a link that might help to make sure your software is updated. I think I originally rebooted the PC with the tuner connected to up date the driver. This was done not connected to the motorcycle. Extreme care needs to be taken when you are connected to the ECM        http://www.1130cc.com/forums/showthread.php?t=99969

« Last Edit: April 23, 2009, 03:27:29 PM by BK »
Logged

ronw48

  • Newbie
  • *
  • Offline Offline
  • Posts: 25
  • 2010 Limited - 2008 Nightster
Re: Super Sert Disc Needed
« Reply #6 on: April 23, 2009, 03:13:56 PM »

Been there and done that.  I did finally get the dealer to give me a copy of the latest map from my dyno run but as soon as I click on it, it starts to open up the configuration so you can see what the map is for and crashes the program.  Guess I gotta go find a -09 version of the software.
Logged
 

Page created in 0.233 seconds with 21 queries.