Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Sean M Cary]

Not the crossover, got that from Jenni...

for the connection from the tank to the EFI...  (circled)

[sportygordy]

Someone does, I've seen them on other bikes. Maybe Custom Chrome? 

Your picture raised another question. A few months ago I installed the fancy chrome cover over the petcock and discovered a fuel leak on the top side going to the tank. When i removed the chrome petcock cover the leak disappeared. Anyone else see this? Is there a fix?

[PR3VS56]

Someone does, I've seen them on other bikes. Maybe Custom Chrome? 

Your picture raised another question. A few months ago I installed the fancy chrome cover over the petcock and discovered a fuel leak on the top side going to the tank. When i removed the chrome petcock cover the leak disappeared. Anyone else see this? Is there a fix?

I'd check the o-ring inside the petcock.  It's hard to see, but it's in there, buried into the sides.  It's the same o-ring as your oil plug and can tear when you remove/connect the petcock.  A slight movement in the petcock will cause a leak if the o-ring is bad.  It can be intermittent as you describe.

[erniezap]

Jim (HD-Dude) installed braided lines on both of my bikes.  He'd be a good person to ask.

[Fired00d]

Not the crossover, got that from Jenni...

for the connection from the tank to the EFI...  (circled)

Sean,
This is what many of us have used - "Braided Stainless Steel EFI Fuel Line   63020-04". It doesn't show that it will work w/our bikes (showing under Dyna's only), but the rating (fuel pressure) is the same on our bikes as this was designed for. MoCo website (P/A) is saying it's currently down for maintenance so I can't link you to the page.

 
Ride Safe,
Fired00d
 

[Sean M Cary]

Sean,
This is what many of us have used - "Braided Stainless Steel EFI Fuel Line   63020-04". It doesn't show that it will work w/our bikes (showing under Dyna's only), but the rating (fuel pressure) is the same on our bikes as this was designed for. MoCo website (P/A) is saying it's currently down for maintenance so I can't link you to the page.

 
Ride Safe,
Fired00d
 

saw that this morning - will give it a whirl, I will have the tank off this weekend to do my alignment and put my new Velva Ride stuff in - want to get everything I can done at once

thanks

[Fired00d]

Here are a few pictures w/that piece installed...

Don's (TLR)..

Spyders (Spydglide)...

Mine....

 
Ride Safe,
Fired00d
 

[bisounours]

one more .....

[Brinks]

So this should be a direct replacement for '09 SEUC  No other modifications are required? 

It sure does look sweet!! Now all I need is the oil cooler hose kit in Braided hose 

[Ghost Rider]

So this should be a direct replacement for '09 SEUC  No other modifications are required? 

It sure does look sweet!! Now all I need is the oil cooler hose kit in Braided hose 

You don't need a kit.  Just buy the braided line and clamps and do it yourself.  Its easy, especially if you have Twolane do it for you.   

[Brinks]

TWOLANE, when are you coming to Chicago?     

[Ghost Rider]

TWOLANE, when are you coming to Chicago?     

I think I have plent of extra hose left, I will be sure and send it with him.   

[Twolanerider]

TWOLANE, when are you coming to Chicago?     

Three or four times a year most years!  But I don't do Chicago style pizza.  Hotels have swimming pools.  Don't need anything else that deep .