www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2] 3  All

Author Topic: Chrome for starter  (Read 9216 times)

0 Members and 2 Guests are viewing this topic.

Pifemaster

  • Newbie
  • *
  • Offline Offline
  • Posts: 22
  • Pifemaster
Re: Chrome for starter
« Reply #15 on: December 01, 2005, 07:15:42 PM »
OK - So I am an impatient person. But I was able to answer my own question. I just went out and removed the 2 inner phillips head screws and installed the new cover. For anyone else that is planning on installing one of these covers, it is very simple. You can remove the existing screws without worrying about anything else coming loose. I just put a drop of blue loctite on the new screws when I installed them.
Logged
Thank you,
Robert Pfeifer

AUSSIE_FLSTFSE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1361
  • Aussie

    • CVO1: FLSTFSE
    • Aussie's home page
Re: Chrome for starter
« Reply #16 on: December 01, 2005, 07:24:30 PM »
Quote
OK - So I am an impatient person. But I was able to answer my own question. I just went out and removed the 2 inner phillips head screws and installed the new cover. For anyone else that is planning on installing one of these covers, it is very simple. You can remove the existing screws without worrying about anything else coming loose. I just put a drop of blue loctite on the new screws when I installed them.



Rob,
Thanx for the tip, I hope to be doing it very soon myself!

 [smiley=drink.gif] [smiley=drink.gif] [smiley=xyxthumbs.gif]
Logged
FATBOYS RULE

OCD is a disease

AUSSIE_FLSTFSE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1361
  • Aussie

    • CVO1: FLSTFSE
    • Aussie's home page
Re: Chrome for starter
« Reply #17 on: December 01, 2005, 07:30:06 PM »
Rob,
Do you see the need for the chrome solineoid cover? I thought I could get away with just the chrome starter cover.  [smiley=confused5.gif]



 [smiley=drink.gif]
Logged
FATBOYS RULE

OCD is a disease

Pifemaster

  • Newbie
  • *
  • Offline Offline
  • Posts: 22
  • Pifemaster
Re: Chrome for starter
« Reply #18 on: December 01, 2005, 08:01:02 PM »
Quote
Rob,
Do you see the need for the chrome solineoid cover? I thought I could get away with just the chrome starter cover.

I did also change the solenoid end cover (it only cost me $15.25). It is not very noticable especially since I also have the Kuryakyn oil line cover (p/n 8223KU) that helps hide the solenoid cover even more than the stock setup.
Logged
Thank you,
Robert Pfeifer

AUSSIE_FLSTFSE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1361
  • Aussie

    • CVO1: FLSTFSE
    • Aussie's home page
Re: Chrome for starter
« Reply #19 on: December 08, 2005, 05:48:55 AM »
Quote
WOO HOO!!!!! - It just came via UPS.

Now I have a question for reo (or anyone else that may know) can I install the new starter end cap (DS-325197) without pulling the old end cap off of the starter? It looks like you just remove the 2 existing inner screws and mount the spacers - cover & longer screws, but I don't want to loosen the existing screws only to find out they are holding brushes or something else in place.




Got mine today, thanks for the install tip, I had it on in 5 minutes. Looks great

 [smiley=drink.gif]
Logged
FATBOYS RULE

OCD is a disease

EAGLE1

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1500
    • FL


    • CVO1: 2015 FLHXSE CVO Street Glide "Silvia"
    • CVO2: 2006 FLSTFSE² Screamin’ Eagle® Fat Boy® (SOLD)
Re: Chrome for starter
« Reply #20 on: December 08, 2005, 07:15:04 PM »
Quote
I did also change the solenoid end cover (it only cost me $15.25). It is not very noticable especially since I also have the Kuryakyn oil line cover (p/n 8223KU) that helps hide the solenoid cover even more than the stock setup.

yo piefman, how about showing us some pics of your blue bike with all of your mods.
thanks in advance for any posts.

 [smiley=worthless.gif]
Logged
Toes in the water, ass in the sand

tunedse2

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 313
  • 2006 SE FatBoy Autumn Haze
Re: Chrome for starter
« Reply #21 on: December 27, 2005, 02:40:36 PM »
Am I reading this right, The starter end cover is discontinued ?
Logged

EAGLE1

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1500
    • FL


    • CVO1: 2015 FLHXSE CVO Street Glide "Silvia"
    • CVO2: 2006 FLSTFSE² Screamin’ Eagle® Fat Boy® (SOLD)
Re: Chrome for starter
« Reply #22 on: December 27, 2005, 03:03:53 PM »
Quote
Am I reading this right, The starter end cover is discontinued ?

no way, i just ordered one 2 weeks ago from the link that reo, provided above.
http://www.bikerparts2go.com/en-us/dept_84.html
Logged
Toes in the water, ass in the sand

tunedse2

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 313
  • 2006 SE FatBoy Autumn Haze
Re: Chrome for starter
« Reply #23 on: December 27, 2005, 03:34:22 PM »
Thanks Eagle
Logged

AUSSIE_FLSTFSE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1361
  • Aussie

    • CVO1: FLSTFSE
    • Aussie's home page
Re: Chrome for starter
« Reply #24 on: December 27, 2005, 04:21:16 PM »
Quote
Am I reading this right, The starter end cover is discontinued ?


I ordered mine after that message from pifemaster also  recieved & fitted it on Dec 2nd. Looks great too! Max there was very helpful (some how Drag Specialties trades as Motor Parts to Go

Cheers
 [smiley=drink.gif] [smiley=drink.gif]
Logged
FATBOYS RULE

OCD is a disease

erniezap

  • Global Moderator
  • 2.5K CVO Member
  • *****
  • Offline Offline
  • Posts: 4900

    • CVO1: 2012 SEUC - Black/Orange
Re: Chrome for starter
« Reply #25 on: December 27, 2005, 07:09:12 PM »
As usual

[smiley=worthless.gif]
Logged
2012 Black/Orange SEUC

AUSSIE_FLSTFSE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1361
  • Aussie

    • CVO1: FLSTFSE
    • Aussie's home page
Re: Chrome for starter
« Reply #26 on: December 27, 2005, 07:51:09 PM »
OK

 [smiley=drink.gif]
Logged
FATBOYS RULE

OCD is a disease

AUSSIE_FLSTFSE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1361
  • Aussie

    • CVO1: FLSTFSE
    • Aussie's home page
Re: Chrome for starter
« Reply #27 on: December 27, 2005, 07:52:55 PM »
OKK
 [smiley=drink.gif]
Logged
FATBOYS RULE

OCD is a disease

VegasFatSE

  • Newbie
  • *
  • Offline Offline
  • Posts: 11
  • FLHRSEI.ORG
HD #'s
« Reply #28 on: January 23, 2006, 06:15:16 PM »
These are parts I found for my 05 SE FatBoy
Here are the Starter parts I ordered after seeing them on a Yellow SE duece.
Solenoid Cover- 31783-00
Starter End Cover- 31535-91
End Cover Bracket- 31527-90
The cover has one button head bolt holding it to the bracket, I was sold two nuts with built in lock washers(for braket) and a chrome button Head bolt.
Also on receipt here: Chrome Fork Slider Drain Bolts 45848-03
Logged
RB Racing 2-1 Propipe, S&S 570's,SERT,TwinScan+

AUSSIE_FLSTFSE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1361
  • Aussie

    • CVO1: FLSTFSE
    • Aussie's home page
Re: HD #'s
« Reply #29 on: January 24, 2006, 06:08:05 AM »
Quote
These are parts I found for my 05 SE FatBoy
Here are the Starter parts I ordered after seeing them on a Yellow SE duece.
Solenoid Cover- 31783-00
Starter End Cover- 31535-91
End Cover Bracket- 31527-90
The cover has one button head bolt holding it to the bracket, I was sold two nuts with built in lock washers(for braket) and a chrome button Head bolt.
Also on receipt here: Chrome Fork Slider Drain Bolts 45848-03





Welcome aboard vegasfatse, Guess you live in vegas, Would like to see some pics of your scoot. Also what color do you have, what mods have you done.

cheers
 [smiley=drink.gif]
Logged
FATBOYS RULE

OCD is a disease
Pages: 1 [2] 3  All
« previous next »
 

Page created in 0.219 seconds with 21 queries.