www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: fullsak in an 05?  (Read 716 times)

0 Members and 1 Guest are viewing this topic.

hogasm

  • Guest
fullsak in an 05?
« on: July 03, 2009, 04:02:24 PM »
Anyone installed fullsak baffles into an 05 SEEG?
Logged

dartman

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 940
Re: fullsak in an 05?
« Reply #1 on: July 03, 2009, 04:17:01 PM »
Quote from: hogasm on July 03, 2009, 04:02:24 PM
Anyone installed fullsak baffles into an 05 SEEG?
Yes, but it requires swapping the Fullsac 4in ends for the OEM 3 1/2in ends not much of a job with a chop saw and a welder, unless your want to maintain the stock look, you can pick up a nice set of 06-08 CVO mufflers cheap and swap the baffles more easily.
Logged

DakotaZeb

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 535
  • FLHRSEI.ORG
Re: fullsak in an 05?
« Reply #2 on: July 03, 2009, 04:18:31 PM »
They won't fit in the '05 and earlier stock CVO mufflers.  Those mufflers were all 3.5".  From '06 on they are 4" cans.  You will need to buy a set of '06 or later CVO touring mufflers and then do teh FullSac conversion.  That's what I just did and put on my '03 SERK.
Logged

Pajoe

  • Newbie
  • *
  • Offline Offline
  • Posts: 26
Re: fullsak in an 05?
« Reply #3 on: July 03, 2009, 08:18:17 PM »
Contact Fullsac , I think  you can send your mufflers and Steve will make baffles for your 3 1/5 inch.
Logged
 

Page created in 0.207 seconds with 20 queries.