Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[amigo Jorge]

I just got my shipment from Radiantz products, it 2 weeks as they were low on inventory
The total cost for the 2 items $123.12

Hello Jeff.....I got my bike...did you see the pics......question: did you install already the LED lights? Any instructions how to do it? I purchase the HOG lite but I didn't a nice place to pu it...sincerely, I don't like...i am thinking to put on ebay..

[SEULTRA]

I just ordered the radiantz LED lights for under the tourpak that GlideBoy installed. For anyone who has done the install.... where did you connect the wires at? Pics would be great. Thanks!
 

[Mistered]

I just installed the radiantz lights (pn 6121-00 and 4000-11) on my tour pack.  Piece of cake on the install.  There was a plug in the tour pac that had all three wired required to make it a running and brake light (ground, brkae and tail light).  I feed the wires right through the hole in the bottom of the tour pack where the screw went through before I moved the tour pack to th rear position.  This way you can't see any exposed wires.  It makes a big difference.  Enjoy. 8-)

Ed

[SEULTRA]

Thanks Ed! That sounds EZ ... wish all my add-ons were that way ... nahhhhhh, then I wouldn't get to use my extensive vocabulary (&@#%$$@@!!!)  

[no-rain]

I am going to go with the following setup:


4889 - Deluxe Panacea Taillight with LED Blue Dot
Review Item <http://www.customdynamics.com/harley_turn_signal_panacea.htm>

4857 - Universal Load Equalizer- Alarm
Review Item <http://www.customdynamics.com/harley_turn_signal_panacea.htm>

4835 -Improved Technology Panacea Turn Signal Inserts - Deuce Style
Review Item <http://www.customdynamics.com/harley_turn_signal_panacea.htm>

4836 - L.E.D. Front Run-Turn Signal Inserts for Classic Style Bullet Turn Signal
Review Item <http://www.customdynamics.com/harley_turn_signal_panacea.htm>

6121-00 - Dual Element Circuit for Flex 65-100 LEDs
Review Item <http://www.customdynamics.com/flex_led_array.htm>

1 Ft Flexible RED LED Array Kit 1MMR1FTKT
4000-11 Review Item <http://www.customdynamics.com/flex_led_array.htm>

The thread really helped me a lot; thanks to all  [smiley=xyxthumbs.gif]. Now all I need is the bike. Expected delivery date is March 8th.

No-Rain (aka Rainman)

[06ULTRASE]

I put the LED strip on mine along with the Heavycycles tail light and the dynamic-clusters to replace the turn signals. I'll get some pictures later. Looks great and adds alot of light back there.

http://www.customdynamics.com/harley_davidson_motorcycle_taillight_heavycycles.htm

http://www.customdynamics.com/motorcycle_dynamic_clusters.htm

[RJ749]

I have the LED turn/brake and tail light and they are great a bit tough to tell in a pic though.

[RJ749]

Another shot

[06ULTRASE]

Hey Glideboy or Fr8tran, where did you get the antennas, I remember FR8 posting but I can't find it.
Thanks in advance.

[RJ749]

Hey Glideboy or Fr8tran, where did you get the antennas, I remember FR8 posting but I can't find it.
Thanks in advance.

06 I think you'll find them here.  I did a search for "short antenna".

http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1131460354/24#24

[06ULTRASE]

Now why didn't I think of that.   [smiley=nixweiss.gif] [smiley=worthless.gif]
Thanks  

[SEULTRA]

I have the LED turn/brake and tail light and they are great a bit tough to tell in a pic though.

OK.... now you have me thinkin about the lighted saddlebag handles... they look great on yer scoot. BTW I like the color (just like mine!!)

 [smiley=huepfenlol2.gif] [smiley=huepfenlol2.gif] [smiley=huepfenlol2.gif]

[Hazer_52]

Just received my Radiantz LED light strip (4000-11) and wanted to connect wiring to existing plug inside tour pack without wire splicing.  After several visits to parts dept at dealership trying to find the female plug and pins (no one could find the P/N's), I final got the plug and pins from the service mgr.   Anyone want the part numbers, .... here they are.

P/N 73103-96BK, tab housing, 3 position   (female plug)  ---  1 needed
P/N 73190-96 ,  terminal pins    --- 3 needed

total cost was $4.80 + tax  

[RJ749]

OK.... now you have me thinkin about the lighted saddlebag handles... they look great on yer scoot. BTW I like the color (just like mine!!)

 [smiley=huepfenlol2.gif] [smiley=huepfenlol2.gif] [smiley=huepfenlol2.gif]

Thanks SE, one of the few things I wish the SE had is the tour pak lights on my 01 Ultra.  The saddle bag lights give me the light I'm after and they flash with the turn signal.

Love your color BTW.

[RJ749]

Just received my Radiantz LED light strip (4000-11) and wanted to connect wiring to existing plug inside tour pack without wire splicing.  After several visits to parts dept at dealership trying to find the female plug and pins (no one could find the P/N's), I final got the plug and pins from the service mgr.   Anyone want the part numbers, .... here they are.

P/N 73103-96BK, tab housing, 3 position   (female plug)  ---  1 needed
P/N 73190-96 ,  terminal pins    --- 3 needed

total cost was $4.80 + tax  

Show us the light strip install when done.

 [smiley=worthless.gif]