Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[fxstbharley2008]

Guys I want to know your opinon?
Whos going with True Duals (when they become available)?
or FullSac?
AND WHY?

[HawgDoc]

What are you looking for? If it's performance, in my opinion you cant get two cylinders to run in 'perfect harmony' with each other when the head pipes are so different, such as in true-duals where the rear head pipe does a u-turn to get over to the left side muffler. You can tune to get it good, but it will never be perfect. Exhaust back-pressure and sonic wave patterns should be identical on all cylinders for perfect 'suck-squeeze-bang-blow' characteristics... of course, in my opinion.

[RedDevil]

What are you looking for? If it's performance, in my opinion you cant get two cylinders to run in 'perfect harmony' with each other when the head pipes are so different, such as in true-duals where the rear head pipe does a u-turn to get over to the left side muffler. You can tune to get it good, but it will never be perfect. Exhaust back-pressure and sonic wave patterns should be identical on all cylinders for perfect 'suck-squeeze-bang-blow' characteristics... of course, in my opinion.

Hmmm, that holds an entirely different meaning in Las Vegas.  

  

[RedDevil]

Guys I want to know your opinon?
Whos going with True Duals (when they become available)?
or FullSac?
AND WHY?

Like stated, it depends on what you want.  If you just want a different sound (read louder), then the Fulsac re-core is a good option ... if you're looking for more performance, then I would either stay with the stock 2-1-2 header/collector setup and get rid of the CAT in the collector, or buy a set of aftermarket pipes, like the Vance and Hines 2-1-2 set up with the power chamber.  ideally, for performance and sound you'd want to go with a true 2 into 1, like the D&D FatCats and put the "ghost" pipe on the left side of the bike to balance the looks, if you want to keep the dual pipe look.

[delnel]

What did you mean by (read louder)

[Mr D]

What are you looking for? If it's performance, in my opinion you cant get two cylinders to run in 'perfect harmony' with each other when the head pipes are so different, such as in true-duals where the rear head pipe does a u-turn to get over to the left side muffler. You can tune to get it good, but it will never be perfect. Exhaust back-pressure and sonic wave patterns should be identical on all cylinders for perfect 'suck-squeeze-bang-blow' characteristics... of course, in my opinion.

Is that why Bassani have the rear cylinder loop for equal length for pre '09 models ?

[mjb765]

Is that why Bassani have the rear cylinder loop for equal length for pre '09 models ?

Yep....with true duals you typically lose a little bottom end power and Bassani is trying to help that with that loop. For the best low end, some sort of crossover or common pipe is helpful. Kind of like an "H" pipe on a car.

[StreetDog]

Like stated, it depends on what you want.  If you just want a different sound (read louder), then the Fulsac re-core is a good option ... if you're looking for more performance, then I would either stay with the stock 2-1-2 header/collector setup and get rid of the CAT in the collector, or buy a set of aftermarket pipes, like the Vance and Hines 2-1-2 set up with the power chamber.  ideally, for performance and sound you'd want to go with a true 2 into 1, like the D&D FatCats and put the "ghost" pipe on the left side of the bike to balance the looks, if you want to keep the dual pipe look.

Are the fulsac baffles that much louder than stock? Sounds like they may be too loud for me.

[guppytrash]

Are the fulsac baffles that much louder than stock? Sounds like they may be too loud for me.

KingDog

I have the 1.75 fulsac baffles and they are not too loud.  I ride with a buddy who has the V&H true dual/monster ovals on the identical bike and mine is not as loud.  Not that either setup is loud.  His monsters sound great but so does my fulsacs. 
If it helps I was not going to do pipes on this bike because I was done with loud pipes, ears ringing at the end of the day.  Sound is like taste cant tell you that you will like it just because I do.  But I did not want loud but I did want performance and a note or a tone that sounded good and I am very happy with my 1.75 fulsac.  Hope this helps you with your decision.

guppytrash 

[igofar]

I have the 2"baffles and the Dual Headpipe kit on my '07.
I run over 10.5-1 compression and these baffles sound great a idle or slight throttle openings
but when I "get on it," no one enjoys riding behind me!

I would recommend going with the 1.75 baffles if noise is a concern.

PS, they are a top shelf product and Fullsac is a great vendor to deal with!!

Brad

[StreetDog]

 Thanks guppytrash, that helps. Just trying to decide what to do with the exhaust when my new SESG comes in. I think I will check into an aftermarket header pipe ( hopefully they will be out later this year ) to get rid of the CAT and also go with the fulsac replacement baffles. 

[HOGMIKE]

I have the 2"baffles and the Dual Headpipe kit on my '07.
I run over 10.5-1 compression and these baffles sound great a idle or slight throttle openings
but when I "get on it," no one enjoys riding behind me!

I would recommend going with the 1.75 baffles if noise is a concern.

PS, they are a top shelf product and Fullsac is a great vendor to deal with!!

Brad

Yep, what HE said!!!!
Totally agree!!

[RedDevil]

What did you mean by (read louder)

If you just want a louder sound than the stock pipes and aren't too concerned about additional performance yet...should have been a little clearer I guess.   

[StreetDog]

If you just want a louder sound than the stock pipes and aren't too concerned about additional performance yet...should have been a little clearer I guess.   

  So let see if I understand what you're saying......fulsac baffles will add sound but an unnoticed amount of performance. What about if you de-cat the header pipes and add the fulsac baffles? Will you be able to feel any performance gains?

[HOGMIKE]

  So let see if I understand what you're saying......fulsac baffles will add sound but an unnoticed amount of performance. What about if you de-cat the header pipes and add the fulsac baffles? Will you be able to feel any performance gains?

AND, add a good tune.........THEN you will actually feel a difference.
It's the sum of a good combo.
Performance=money, the old saying goes, how fast can you afford to go?