www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 ... 32 33 [34] 35 36 ... 49

Author Topic: JCZ mods have begun.......  (Read 197323 times)

0 Members and 1 Guest are viewing this topic.

mjb765

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6808

    • CVO1: 2011 FLHXSE--sold
    • CVO2: 2015 FLHXSE--sold
    • CVO3: 2018 FLTRXSE
Re: JCZ mods have begun.......
« Reply #495 on: December 12, 2009, 08:40:22 PM »
Looks good....2 questions.....are those holes there when you buy the TP or do you have to make them to mount the stock pad?? And is the lower pad Corbin also??
Logged

JCZ

  • Global Moderator
  • 10K CVO Member
  • *****
  • Offline Offline
  • Posts: 23603
    • AZ


    • CVO1: 04 SEEG...sold
    • CVO2: 10 SESG...sold
    • CVO3: 13 FLHTCSE 8
Re: JCZ mods have begun.......
« Reply #496 on: December 12, 2009, 08:40:31 PM »
Quote from: mjb765 on December 12, 2009, 08:31:35 PM
Looks good....2 questions.....are those holes there when you buy the TP or do you have to make them to mount the stock pad?? And is the lower pad Corbin also??

The holes were already there when I got the tour pack.  However, the pad is small so it only has the two center holes (about 1" apart, in vert. position) to hold the pad.  Due to the holes being verticle, there was still a bit of swivel in the pad so I had them drill a third hold in the tour pack.  That third hole would be near the outer edge of the pad, to stabalize the pad.

By the way, yes, the lower pad is Corbin also.  It's just a pillow with a thin piece of foam in it.  I asked them to put a double layer of foam sheet in it, so mine looks a little more like a pillow. :)  It's attached by a couple pieces of 2" velcro across the top and bottom, full width.  So you can remove the lower pad, adjust it or whatever.....with no problem.
« Last Edit: December 12, 2009, 08:43:59 PM by JCZ »
Logged
Never trade the thrills of living for the security of existence.  Remember...it's the journey, not the destination!

West Coast GTG   
Reno, NV (04), Reno, NV (05),  Cripple Creek, CO (06)  Hood River, OR (09), Lake Tahoe, CA (11) Carmel, CA (14), Ouray CO (15) Fortuna, Ca. (16)

mjb765

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6808

    • CVO1: 2011 FLHXSE--sold
    • CVO2: 2015 FLHXSE--sold
    • CVO3: 2018 FLTRXSE
Re: JCZ mods have begun.......
« Reply #497 on: December 12, 2009, 08:50:34 PM »
 :nixweiss: So those 2 outer holes on either side of the pack are already there??? I'm not worried about the center holes since I am putting a pad there nayway, but I would like to do something wirh the outer holes. Maybe chrome button head allen bolts?
« Last Edit: December 12, 2009, 09:56:27 PM by mjb765 »
Logged

Sapper6

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 441

    • CVO1: 2010 SESG
Re: JCZ mods have begun.......
« Reply #498 on: December 13, 2009, 08:22:46 PM »
TP is looking really great JC.  Can't wait to see how the solo looks on the scoot.  Terrie's bike looks superb as well.  I sure do envy a guy who can keep his better half happy with bike mods.
Logged

mjb765

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6808

    • CVO1: 2011 FLHXSE--sold
    • CVO2: 2015 FLHXSE--sold
    • CVO3: 2018 FLTRXSE
Re: JCZ mods have begun.......
« Reply #499 on: December 13, 2009, 08:37:19 PM »
Quote from: Sapper6 on December 13, 2009, 08:22:46 PM
TP is looking really great JC.  Can't wait to see how the solo looks on the scoot.  Terrie's bike looks superb as well.  I sure do envy a guy who can keep his better half happy with bike mods.

So true...so true.....
Logged

JCZ

  • Global Moderator
  • 10K CVO Member
  • *****
  • Offline Offline
  • Posts: 23603
    • AZ


    • CVO1: 04 SEEG...sold
    • CVO2: 10 SESG...sold
    • CVO3: 13 FLHTCSE 8
Re: JCZ mods have begun.......
« Reply #500 on: December 23, 2009, 10:36:40 PM »
Had the cat removed and the Fullsac 1.75 baffles, the TTS tuner and the new Fueling 574 cams.  My dyno sheet can be seen here....  http://www.cvoharley.com/smf/index.php?topic=44545.0
Logged
Never trade the thrills of living for the security of existence.  Remember...it's the journey, not the destination!

West Coast GTG   
Reno, NV (04), Reno, NV (05),  Cripple Creek, CO (06)  Hood River, OR (09), Lake Tahoe, CA (11) Carmel, CA (14), Ouray CO (15) Fortuna, Ca. (16)

WestCoastRuss

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2290
    • CA


    • CVO1: 2010 FLHXSE Tequila Sunrise
    • CVO2: 2014 FXSBSE Sedona Sand
Re: JCZ mods have begun.......
« Reply #501 on: December 23, 2009, 11:32:10 PM »
Quote from: JCZ on December 23, 2009, 10:36:40 PM
Had the cat removed and the Fullsac 1.75 baffles, the TTS tuner and the new Fueling 574 cams.  My dyno sheet can be seen here....  http://www.cvoharley.com/smf/index.php?topic=44545.0

I just may have to drive over the Sierras this spring.  Nice chart...tight...very tight
Logged
Tequila makes her clothes fall off....

Wheelsnkeels

  • Freedom isnt free Thank a Vet!
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1300
  • Indiana Patriot Guard Riders

    • CVO1: 2010 SESG Tequila Sunrise
    • CVO2: 2007 Heritage Custom (not CVO) too much chrome
    • CVO3: 2006 Heritage Classic (overinvested in mods ?)
Re: JCZ mods have begun.......
« Reply #502 on: December 26, 2009, 05:11:46 PM »
Torque looks great and it has a smooth curve but the HP appears to come on pretty late in the RPM range.

Sounds like the ride test felt better than the chart? :2vrolijk_21:
Logged
RC Components Savage  200/55/17 Rear 140/70/21 front
Corbin Dual Tour (Heated)
Street Magic LED's
TTS Mastertune
Fueling 574 Cams & Lifters
SE Adjustable pushrods
Progressive Mono Tubes
Hog Tunes Hog Pods
J&M 7.25 Speakers w/250W Amp
Kuryakyn 9182 License plate frame
Vance & Hines Power Dual's
BUB Boom Cans slip on Exhaust 
Detach Tequila King Tour Pak
Rumble passenger Floorboards
Freedom Shield 7"
Riders Claw Iphone

JCZ

  • Global Moderator
  • 10K CVO Member
  • *****
  • Offline Offline
  • Posts: 23603
    • AZ


    • CVO1: 04 SEEG...sold
    • CVO2: 10 SESG...sold
    • CVO3: 13 FLHTCSE 8
Re: JCZ mods have begun.......
« Reply #503 on: December 26, 2009, 11:50:31 PM »
Quote from: Wheelsnkeels on December 26, 2009, 05:11:46 PM
Torque looks great and it has a smooth curve but the HP appears to come on pretty late in the RPM range.

Sounds like the ride test felt better than the chart? :2vrolijk_21:

Like the ol' saying goes..... "torque gets you there, horsepower keeps you there".

I wanted "useable" power for street riding, not top end drag strip power.  Running through the gears is great. :2vrolijk_21:

I got the solo tour pack rack on tonight but pics are going to have to wait.
Logged
Never trade the thrills of living for the security of existence.  Remember...it's the journey, not the destination!

West Coast GTG   
Reno, NV (04), Reno, NV (05),  Cripple Creek, CO (06)  Hood River, OR (09), Lake Tahoe, CA (11) Carmel, CA (14), Ouray CO (15) Fortuna, Ca. (16)

DICKW

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1908
  • If you ain't Riding..You ain't living
Re: JCZ mods have begun.......
« Reply #504 on: December 27, 2009, 06:10:09 AM »
Quote from: JCZ on December 26, 2009, 11:50:31 PM

I got the solo tour pack rack on tonight but pics are going to have to wait.

Were gonna have to wait, man your killing us.. :nixweiss:
Logged
2009 Screaming Eagle Electra Glide Ultra Classic, Hawg Wired, KW 10.5, 2" Pull Back Handlebars, Dakota Digital, V&H Power Dual w/ Monster Ovals (Black Tips),
SE Air Cleaner, Zippers 575 Cams, Zippers Adjustable Push-rods, Fueling Lifters,
Thunder-Max Auto Tune, SE Compensator, Legend Air Suspension.

mjb765

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6808

    • CVO1: 2011 FLHXSE--sold
    • CVO2: 2015 FLHXSE--sold
    • CVO3: 2018 FLTRXSE
Re: JCZ mods have begun.......
« Reply #505 on: December 27, 2009, 05:04:54 PM »
Quote from: DICKW on December 27, 2009, 06:10:09 AM
Were gonna have to wait, man your killing us.. :nixweiss:

I have a solo TP mount...would you like a pic of that? :huepfenlol2:

Still waiting on the Tour Pack to come in.....
Logged

JCZ

  • Global Moderator
  • 10K CVO Member
  • *****
  • Offline Offline
  • Posts: 23603
    • AZ


    • CVO1: 04 SEEG...sold
    • CVO2: 10 SESG...sold
    • CVO3: 13 FLHTCSE 8
Re: JCZ mods have begun.......
« Reply #506 on: December 27, 2009, 07:22:44 PM »
Dick put the guilt trip on me so..........Jon (Jonga) & Susan (WasJons) rode up this morning so we all went for a ride and I got some photos.

Let me just say again that I am very, very happy with these Fueling 574 cams.  Coupled with theTTS tuner, 1.75 Fullsac baffles and the catless head pipe, it's exactly what I wanted!  Real, useable power without bumping compression or doing head work and it has power at all RPMs in all six gears and it's not to loud!  I let Jon ride it for awhile up in the hills......he's sold. :)

The king tour pack with the Corbin backrest and backrest pad work great in the forward position.  If you guys will remember from my seat post, I had two layers of foam put in the back rest pad (the lower section that velcros to the tour pack box below the lid) and that helped in this case.  The next time I'm in Hollister I may have them make me another one with three or four layers (will have to test ride it with each) of foam.

I still have to find some chrome button heads to temporarily fill the holes in the tour pack lid where the regular back rest bolts in.  I want to keep it able to use either way.  If my wife's bike were in the shop for a period of time then she can still ride with me.  This past summer Vgirl spent a week on the back of my bike when she flew out here from Georgia for the GTG in Mt. Hood......so who knows when I'll need to go back to the passenger position.
« Last Edit: December 27, 2009, 07:45:47 PM by JCZ »
Logged
Never trade the thrills of living for the security of existence.  Remember...it's the journey, not the destination!

West Coast GTG   
Reno, NV (04), Reno, NV (05),  Cripple Creek, CO (06)  Hood River, OR (09), Lake Tahoe, CA (11) Carmel, CA (14), Ouray CO (15) Fortuna, Ca. (16)

JCZ

  • Global Moderator
  • 10K CVO Member
  • *****
  • Offline Offline
  • Posts: 23603
    • AZ


    • CVO1: 04 SEEG...sold
    • CVO2: 10 SESG...sold
    • CVO3: 13 FLHTCSE 8
Re: JCZ mods have begun.......
« Reply #507 on: December 27, 2009, 07:24:41 PM »
We rode up to Ione for lunch....
Logged
Never trade the thrills of living for the security of existence.  Remember...it's the journey, not the destination!

West Coast GTG   
Reno, NV (04), Reno, NV (05),  Cripple Creek, CO (06)  Hood River, OR (09), Lake Tahoe, CA (11) Carmel, CA (14), Ouray CO (15) Fortuna, Ca. (16)

JCZ

  • Global Moderator
  • 10K CVO Member
  • *****
  • Offline Offline
  • Posts: 23603
    • AZ


    • CVO1: 04 SEEG...sold
    • CVO2: 10 SESG...sold
    • CVO3: 13 FLHTCSE 8
Re: JCZ mods have begun.......
« Reply #508 on: December 27, 2009, 07:27:14 PM »
This may not work so well for a short rider.  Keep in mind that I'm 6'4".  A shorter rider may have to use the Corbin back rest (the tour pack has a mount location about another inch or so back).  For this purpose, I have it mounted in the forward position.

Jon's very short so while he really liked the touring pull back bars, he didn't get to experience riding while resting agains the tour pack like I do.
Logged
Never trade the thrills of living for the security of existence.  Remember...it's the journey, not the destination!

West Coast GTG   
Reno, NV (04), Reno, NV (05),  Cripple Creek, CO (06)  Hood River, OR (09), Lake Tahoe, CA (11) Carmel, CA (14), Ouray CO (15) Fortuna, Ca. (16)

Buy early

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 8679
  • My future if I were Benjamin Button

    • CVO1: 2001 FXDWG2 Switchblade - The Beast
    • CVO2: 2004 FXSTDSE2 Deuce - Beauty
Re: JCZ mods have begun.......
« Reply #509 on: December 27, 2009, 07:28:48 PM »
Quote from: JCZ on December 27, 2009, 07:24:41 PM
We rode up to Ione for lunch....

JC - that's a couple of fine lookin' rides! Glad you got the performance improvements you were looking for!
Logged
Pages: 1 ... 32 33 [34] 35 36 ... 49
« previous next »
 

Page created in 0.224 seconds with 21 queries.