www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Fullsac exhaust tips  (Read 1197 times)

0 Members and 1 Guest are viewing this topic.

Trainwreck

  • Newbie
  • *
  • Offline Offline
  • Posts: 18
Fullsac exhaust tips
« on: August 24, 2009, 09:44:19 PM »
While at Fullsac I found they now make exhaust tips for out stock pipes.  They are slanted and a very nice addition to the exhaust.
Logged

jfh

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 679

    • CVO1: FLTRSE3
Re: Fullsac exhaust tips
« Reply #1 on: August 25, 2009, 04:41:48 PM »
Anyone know if they match the angle of the bags and cutouts on the '09 SERG3?
Logged
Hammer - CVO Member #641

2009 FLTRSE3: Axtell jugs, JE forged flat top pistons, S&S 585 cams, SE 58mm TB, Dewey's Pro-Street porting, SE cam plate, Zipper's tapered pushrods, Cat-less, 2" Fullsac, TTS, Twin Jagg oil coolers, AK-20, 13" Works Black Trackers w/ARS, Clearview, Hawg Wired, Yaffe Monkey Bars, Danny Gray Big Seat

LC110

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 667
    • WI


    • CVO1: 2009 FLTRSE3 Stardust Silver / Titanium Dust 1of 1344
Re: Fullsac exhaust tips
« Reply #2 on: August 25, 2009, 05:48:37 PM »
Quote from: hdfr120 on August 25, 2009, 04:41:48 PM
Anyone know if they match the angle of the bags and cutouts on the '09 SERG3?
They look like a good match to me.
Logged
Spending time learning the science of the mechanisms of friction, lubrication, and wear of interacting surfaces that are in relative motion
Razorback Performance Built & Tuned 113@ 122.59 HP/139.30 TQ

Dan_Lockwood

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2498
Re: Fullsac exhaust tips
« Reply #3 on: August 25, 2009, 10:46:05 PM »
I just talked to Dave at Fullsac this evening and ordered my new 2" baffles, TTS Matertune and a set of these very muffler tips.

I'll post pictures next week after I get them.

I'm looking forward to the upgrades.

 :2vrolijk_21:   :2vrolijk_21:  :2vrolijk_21:
Logged
Dan

2009 SERG Orange / Black
Board Track Racer Project, Ultima 113"/6spd
2021 Coleman UT400 Side By Side

Fullsac Performance

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1768
  • Never ride with a Halfsac! Insist on Fullsac Perf!
    • AZ


    • CVO1: 2024 Road Glide
    • Fullsac Performance
Re: Fullsac exhaust tips
« Reply #4 on: August 26, 2009, 12:25:06 AM »
Quote from: hdfr120 on August 25, 2009, 04:41:48 PM
Anyone know if they match the angle of the bags and cutouts on the '09 SERG3?

The angle is close, but not quite dead on with the saddle bags.
Still a big improvement over stock. JMHO.

Steve
Logged
Never argue with idiots. They will beat you with experience.
 

Page created in 0.217 seconds with 20 queries.