Topic: Passing light electrical connection Q. (Read 2401 times)

Muddywaters · « **on:** September 01, 2009, 11:26:21 PM »

I have an 08 SERK and have just added passing lights. I hooked both passing lights to (service manual, touring models #99483-08) page 8-23 to the number 2 Auxiliary lamps. For some reason...after approx. a couple of minutes....my headlight fuse blows! Any suggestions would sure be appreciated! I have not added the left or right blinkers to the system yet. Within the documentation I received with the kit...there is no wiring diagram. Thanks heaps!! Muddy

Cvostu · « **Reply #1 on:** September 02, 2009, 12:27:57 AM »

that happened to me when i put in the high output passing lamps and head light. you may have to move the passing lamps to another circuit with less of of an amp draw. shouldnt be too hard to do.

Muddywaters · « **Reply #2 on:** September 03, 2009, 12:49:16 AM »

Quote from: cvostu on September 02, 2009, 12:27:57 AM

that happened to me when i put in the high output passing lamps and head light. you may have to move the passing lamps to another circuit with less of of an amp draw. shouldnt be too hard to do.

Ah, so I'm not the only one...LOL. Stu, what circuit did you use? Thanks for the info!! Muddy

Cvostu · « **Reply #3 on:** September 03, 2009, 02:56:06 AM »

not really sure on that one, i took it somewhere and had it done,, I wasa just getting started playing with 20k -2 wheel sicknesses. Maybe I can find out.. I'll ask..

Muddywaters · « **Reply #4 on:** September 03, 2009, 09:09:17 AM »

Thanks Stu...mucho appreciated!! Muddy btw: Know what you mean

Author Topic: Passing light electrical connection Q. (Read 2401 times)

Muddywaters

Passing light electrical connection Q.

Cvostu

Re: Passing light electrical connection Q.

Muddywaters

Re: Passing light electrical connection Q.

Cvostu

Re: Passing light electrical connection Q.

Muddywaters

Re: Passing light electrical connection Q.