Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Highjagger]

( 6 colours arrive at the stock taillight ) ,
The new rear-brake-light does have 3 cables ( black and red and yellow ) .
Where do i have to connect them ?
And how ?
THXS

[NVWLDTHG]

Probably on the stock harnass;  Black is ground, Red/Yellow is brakes, Blue is lights. 

But, I might be color blind.

[Highjagger]

Hey , super duper , and soooo fast , Thank you very much . 

[Dan_Lockwood]

Probably on the stock harnass;  Black is ground, Red/Yellow is brakes, Blue is lights. 

But, I might be color blind.

I installed a LED spoiler on top of my chopped tour-pak.  It had the same three wires.

Under the seat just in front of the battery there is a 4-pin square plug with a cap on it.  With my spoiler LED I got a 4-pin plug.  One of the male pins in the bike side harness turns off/on with the ACC switch on the steering head.  One will come on regardless of the acc switch and will stay on with ign or acc and that's the one I hooked my tail light to.  In that harness there is also a pin that comes on with the brake lights; that of course is the one I hooked my LED brake light to.

I had a Back Off brake light modulator so rather than hooking it up to the rear stock LED's, I hooked it in the LED spoiler circuit and it works great.  When I hit the brake lights the spoiler will flash the 4 times and then stay on for about 4 seconds and then it just keeps repeating the pattern.  This leaves the original vertical LED's to do their own thing with brakes and turn signal.

I put a couple male/female plugs on the "brake" wire so when I remove the tour-pak all I have to do is unplug them all and off it comes.

Just wondering, why don't cars take advantage of the tail light modulators on the third brake light?  It would be very easy to just series in the Back Off module and I think it would really add to the safety factor.  I travel freeway everyday and both in the morning and evening it's sometimes a parking lot on I-70.  When you ride the brakes in this type of driving, the modulating third brake light would keep the traffic behind you reminded of your brake lights.

Highjagger, good luck with your wiring.

    

[Highjagger]

THxs , done but not yet really finished , otherwise i would have post pics . will follow.

[Highjagger]

And here it is :
 The new look for my Fat Ass : ( And the silver one does sparkle    )

[Highjagger]

and

[Highjagger]

and

[Highjagger]

and

[Highjagger]

and

[Highjagger]

last , the ugly taillight  has gone , Juhuuuu yippie

[ice6900]

i see a happy man atlast, will TUV be happy?

the SEeagle plate covers the original holes and looks good!

[GregKhougaz]

Klaus, 

   Great work! !    It looks much better! !   Congratulations! ! 

[Highjagger]

Yes , The rear-brake-LED light with lisence-plate light has TÜV and is very bright and 2 years warranty for 39 Euros ,
Muhuhahaha- Low Budget rules
and the SE medaillon made a friend of mine , the design on it is a individual made foil , not perfect but i can life with it.
Yeah , i am happy , but who knows what will come next .