www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 ... 6 7 [8] 9 10 ... 15

Author Topic: HANDLE BARS  (Read 65600 times)

0 Members and 2 Guests are viewing this topic.

Jim Glide

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 161

    • CVO1: 2006 RG, 2005 RK, 1996 WG, 1991 Fatboy and 10 additional Japanesse bike's: All Sold
    • CVO2: 2009 SERG-Silver Bullet
Re: HANDLE BARS
« Reply #105 on: January 16, 2010, 08:52:42 PM »
Quote from: Highjagger on January 16, 2010, 03:01:32 PM
Yeah , this sounds really cool , great service from Paul , that`s the way it goes .
Thxs also for the seat info but the mustang will not fit my as......... ( too much push forward ) but high quality , i know .
This Paul Yaffee Apes are the reasons for my sleepless nights , damndamndamndamn....... (without general parts appraisal )

Wow, sleepless nights....that's funny :) and believe me, I absolutely know the feeling. Here's a picture of Paul Yaffe from today.
Logged
S&S 585 Cams, SE Pushrods, Stock Head's ported & polished, 10.5 comp, Non-Cat, SERT, Super-Trap exhaust, HP 111.83. TQ 115.86, Mustang Solo, Rider Claw, TP, 14" Paul Yaffe Monkey Bars & Heat Demons

Jim Glide

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 161

    • CVO1: 2006 RG, 2005 RK, 1996 WG, 1991 Fatboy and 10 additional Japanesse bike's: All Sold
    • CVO2: 2009 SERG-Silver Bullet
Re: HANDLE BARS
« Reply #106 on: January 16, 2010, 08:53:53 PM »
And another in front of his booth. :2vrolijk_21:
Logged
S&S 585 Cams, SE Pushrods, Stock Head's ported & polished, 10.5 comp, Non-Cat, SERT, Super-Trap exhaust, HP 111.83. TQ 115.86, Mustang Solo, Rider Claw, TP, 14" Paul Yaffe Monkey Bars & Heat Demons

Jim Glide

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 161

    • CVO1: 2006 RG, 2005 RK, 1996 WG, 1991 Fatboy and 10 additional Japanesse bike's: All Sold
    • CVO2: 2009 SERG-Silver Bullet
Re: HANDLE BARS
« Reply #107 on: January 16, 2010, 08:56:00 PM »
And here's his Monkey Bars on display. It was really nice dealing with Paul, and his booth was a very popular place at today's show in Sacramento, Ca. :bananarock:
« Last Edit: January 16, 2010, 09:09:19 PM by Jim Glide »
Logged
S&S 585 Cams, SE Pushrods, Stock Head's ported & polished, 10.5 comp, Non-Cat, SERT, Super-Trap exhaust, HP 111.83. TQ 115.86, Mustang Solo, Rider Claw, TP, 14" Paul Yaffe Monkey Bars & Heat Demons

Jim Glide

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 161

    • CVO1: 2006 RG, 2005 RK, 1996 WG, 1991 Fatboy and 10 additional Japanesse bike's: All Sold
    • CVO2: 2009 SERG-Silver Bullet
Re: HANDLE BARS
« Reply #108 on: January 16, 2010, 09:08:06 PM »
Also at today's Easy Rider's show was Michael Ballard and Angie from the show, "Full Throttle Saloon" located in Sturgis, South Dakota. There were so cool and very nice. Can't wait to visit their Saloon again this summer with my new Monkey Bars. Michael said that "Tru TV" decided to pick up another 10 shows for this next season. Yahoo!!! :bananarock: :bananarock:
« Last Edit: January 17, 2010, 06:33:21 PM by Jim Glide »
Logged
S&S 585 Cams, SE Pushrods, Stock Head's ported & polished, 10.5 comp, Non-Cat, SERT, Super-Trap exhaust, HP 111.83. TQ 115.86, Mustang Solo, Rider Claw, TP, 14" Paul Yaffe Monkey Bars & Heat Demons

SID8D2

  • Keep the Shinny Side Up
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 272
  • Let's Ride, Winter in the Midwest Sucks!!!!

    • CVO1: 2004 FLHTCSE Black & Blue
    • CVO2: 2009 FLTRSE3 Orange & Black - Spooky
Re: HANDLE BARS
« Reply #109 on: January 17, 2010, 12:28:09 AM »
Jim Glide;
 Awesome updates to the SERG3 and better yet....The memories you and your wife are creating :orange: :orange: :orange:

I'll be looking for your bike at the Full Throttle in Sturgis next year. That show was great, I watched it as a prelude to Sons of Anarchy, glad to hear it'll be on for another season. They had a rough year in 09. 
Logged
2009 Road Glide FLTRSE3 110ci;
Fullsac X-Pipe,
V&H Hi Output Mufflers,
Hawg Wired Dbl Shot,
Crank Welded, Trued, Balanced,
H-Beam Rods,
T-Man 110 Thumper Top End,
T-Man 662-2 Cams,
Woods Directional Lifters,
58mm SE Throttle Body,
TTS Mastertune, 
LePera Daddy Long Legs Seat, 
[img]http://www.cvoharley.com/smf/index.php?action=dlattach;topic=4094.0;attach=138042;image[/i

Jim Glide

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 161

    • CVO1: 2006 RG, 2005 RK, 1996 WG, 1991 Fatboy and 10 additional Japanesse bike's: All Sold
    • CVO2: 2009 SERG-Silver Bullet
Re: HANDLE BARS
« Reply #110 on: January 17, 2010, 01:10:42 PM »
Also could you post a list of parts you used for the conversion?   :nixweiss:

Thanks now mine will have to be done and soon!  :2vrolijk_21:
[/quote]
Here's a list of the Parts needed to complete the installation for the 14" Paul Yaffe Handlebars with the Heat Demons:

Polyurethane Riser Isolators: Part # 56298-03
Brake Line, Diamond             : Part # 41770-09
Brake Line, 40"                      : Part # 1741-0058
Clutch Line S/S BT                  : Part # 1741-0471
Twist Grip Sensor Kit (TBW)   : Part # 32310-08
Symtec Heat Demons             : Part # 210045CRET. I purchased the right side clamp control because my Rider's Claw I-Pod holder is mounted on the left side of my handlebars.
I also remember purchasing a banjo fitting for one of the brake lines mentioned above, but I don't have that Part #.
I hope this helps and good luck with your project.  :2vrolijk_21:
PS. I purchase the 8" wire extension kit, but they weren't needed after all.
Logged
S&S 585 Cams, SE Pushrods, Stock Head's ported & polished, 10.5 comp, Non-Cat, SERT, Super-Trap exhaust, HP 111.83. TQ 115.86, Mustang Solo, Rider Claw, TP, 14" Paul Yaffe Monkey Bars & Heat Demons

faceracer

  • Faceracer
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1042
  • 2019 FLHRXS Road Kind Special
    • KY


    • CVO1: 2019 FLHRXS Road King Special (not a cvo)
Re: HANDLE BARS
« Reply #111 on: January 17, 2010, 10:48:18 PM »
Thanks Jim! Your bike looks great! I can't wait to get some on mine!!!! :2vrolijk_21:
Logged
2019 FLHRXS Road King Special
2016 FLSS Softail Slim Special
2009 CVO Road Glide FLTRSE3
2007 Cobalt Blue FLHX
2001 Chrome Yellow & vivid Black FXDL
1985 Candy Red FXRS
1955 Triumph T110 Tiger chopper built by me!

Jim Glide

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 161

    • CVO1: 2006 RG, 2005 RK, 1996 WG, 1991 Fatboy and 10 additional Japanesse bike's: All Sold
    • CVO2: 2009 SERG-Silver Bullet
Re: HANDLE BARS
« Reply #112 on: January 17, 2010, 10:56:59 PM »
Quote from: faceracer on January 17, 2010, 10:48:18 PM
Thanks Jim! Your bike looks great! I can't wait to get some on mine!!!! :2vrolijk_21:

PM sent
Logged
S&S 585 Cams, SE Pushrods, Stock Head's ported & polished, 10.5 comp, Non-Cat, SERT, Super-Trap exhaust, HP 111.83. TQ 115.86, Mustang Solo, Rider Claw, TP, 14" Paul Yaffe Monkey Bars & Heat Demons

cvo junkie

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 91
Re: HANDLE BARS
« Reply #113 on: January 23, 2010, 09:53:21 PM »
more photos of my handle bars. i gotta say this riding position is amazing. it makes the road glide feel small like a dyna i love it
Logged

cvo junkie

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 91
Re: HANDLE BARS
« Reply #114 on: January 23, 2010, 09:53:51 PM »
another
Logged

cvo junkie

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 91
Re: HANDLE BARS
« Reply #115 on: January 23, 2010, 09:54:26 PM »
one more
Logged

Jim Glide

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 161

    • CVO1: 2006 RG, 2005 RK, 1996 WG, 1991 Fatboy and 10 additional Japanesse bike's: All Sold
    • CVO2: 2009 SERG-Silver Bullet
Re: HANDLE BARS
« Reply #116 on: January 23, 2010, 11:37:12 PM »
Quote from: cvo junkie on January 23, 2010, 09:53:21 PM
more photos of my handle bars. i gotta say this riding position is amazing. it makes the road glide feel small like a dyna i love it

It's amazing how many different types of handlebars there are out there and I bet that is a comfortable riding position. Good for you.  :2vrolijk_21: What type of hand grips are those? Jim
Logged
S&S 585 Cams, SE Pushrods, Stock Head's ported & polished, 10.5 comp, Non-Cat, SERT, Super-Trap exhaust, HP 111.83. TQ 115.86, Mustang Solo, Rider Claw, TP, 14" Paul Yaffe Monkey Bars & Heat Demons

cvo junkie

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 91
Re: HANDLE BARS
« Reply #117 on: January 24, 2010, 12:41:28 AM »
pm grips simply the best grip made
Logged

Smuuth

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 297

    • CVO1: 2009 FLTRSE³
Re: HANDLE BARS
« Reply #118 on: January 24, 2010, 11:17:22 PM »
Just got my 16" Paul Yaffe OEM Monkey Bars.  I will be putting them on my SERG either this week or next.  I bought the PY supersize kit which includes everything needed (wires, heatshrink, clutch and brake lines) to put them on.  Pictures to follow.
Logged
Patriot Guard



The best thing about riding in the rain is you don't have to stop to piss.

Jim Glide

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 161

    • CVO1: 2006 RG, 2005 RK, 1996 WG, 1991 Fatboy and 10 additional Japanesse bike's: All Sold
    • CVO2: 2009 SERG-Silver Bullet
Re: HANDLE BARS
« Reply #119 on: January 25, 2010, 09:49:54 AM »
Quote from: Smuuth on January 24, 2010, 11:17:22 PM
Just got my 16" Paul Yaffe OEM Monkey Bars.  I will be putting them on my SERG either this week or next.  I bought the PY supersize kit which includes everything needed (wires, heatshrink, clutch and brake lines) to put them on.  Pictures to follow.

Most excellent. Can't wait for the photo's
Logged
S&S 585 Cams, SE Pushrods, Stock Head's ported & polished, 10.5 comp, Non-Cat, SERT, Super-Trap exhaust, HP 111.83. TQ 115.86, Mustang Solo, Rider Claw, TP, 14" Paul Yaffe Monkey Bars & Heat Demons
Pages: 1 ... 6 7 [8] 9 10 ... 15
« previous next »
 

Page created in 0.218 seconds with 21 queries.