www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: End caps falling off  (Read 1492 times)

0 Members and 1 Guest are viewing this topic.

RGLIDE

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 53
End caps falling off
« on: September 27, 2009, 06:13:39 PM »
Has anyone been having problems with the chrome endcaps on the handgrips coming off ? I have already lost one and my wifes 09 SERG right handgrip cap is lose about to come off aswell. I was just wondering if anyone is having the same issues.
« Last Edit: September 27, 2009, 08:11:16 PM by RGLIDE »
Logged

MAXX

  • C-17 Loadmaster Beer Drinking Lush
  • Newbie
  • *
  • Offline Offline
  • Posts: 24
Re: End caps falling off
« Reply #1 on: September 27, 2009, 09:09:31 PM »
Yep, lost the left side. Dealer replaced it for free. It cost $16 if you have to buy it. They just snap on. I will most likely replace the grips if I lose another.

Maxx
Logged

bribe36

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 874

    • CVO1: 2009 SERG
Re: End caps falling off
« Reply #2 on: September 27, 2009, 10:09:42 PM »
No problems yet THAT yet. The rubber trim around the fairing, where the two pieces come together, keeps coming off
Logged

Dan_Lockwood

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2498
Re: End caps falling off
« Reply #3 on: September 27, 2009, 11:33:14 PM »
I've not lost one.... YET

I noticed that my throttle cap was not lined up correctly while cleaning one day. I turned the end cap to line it up and it practially fell off in my fingers. I had no issues with my '08 SERK.

I guess I should lose the one I have now and gat a new that fits tighter

what is it with HD?  First the seats don't fit right, chrome pits on the mirrors and the grip end caps are loose and falling off.
Logged
Dan

2009 SERG Orange / Black
Board Track Racer Project, Ultima 113"/6spd
2021 Coleman UT400 Side By Side

JP

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 224

    • CVO1: 05 SEFB Sold
    • CVO2: 09 SERG o/b
Re: End caps falling off
« Reply #4 on: September 28, 2009, 12:22:31 AM »
My left one came off while washing. I put a little glue from a hot glue gun on it then put it back on, it made it snug and the glue can be peeled off the plastic when you take it off if you need too.
Logged

sblair

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 342
Re: End caps falling off
« Reply #5 on: September 28, 2009, 04:17:51 PM »
Yep, I also lost the left side.  Its on the mountian on Hwy 4 just outside of Tahoe.  Dealer ordered and replaced in about a week.
Logged
CVO1-2009 Silver SERG
CVO2-2011 Rio Red RUSE

Dracula

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 186
Re: End caps falling off
« Reply #6 on: September 28, 2009, 04:48:16 PM »
My left side kept coming loose.  I would catch it half-way out.  I put one layer of electrical tape around the tangs and smacked it back in place.  It hasn't tried to come out again.
Logged

:vampire:
 

Page created in 0.212 seconds with 21 queries.