www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Cold Oil in 2007 110 Roak King - Measurement Help ?  (Read 881 times)

0 Members and 1 Guest are viewing this topic.

Two Wheels

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 78
Cold Oil in 2007 110 Roak King - Measurement Help ?
« on: September 27, 2009, 08:02:45 PM »
Gents:

When I pull out the dipstick, engine totally cold (after overnigh sit, but in warm weather - 70's), the oil is at the half way mark between "Full" and "Add oil".  Right in the middle. 

I know when hot oil expands so wanted to ask, totally cold ... at half way up the dipstick ... is the oil at a proper level ? 

Or

Too high?  Too low ?

Thank you,
Logged

hd-dude

  • Global Moderator
  • 5k CVO Member
  • *****
  • Offline Offline
  • Posts: 6646
  • 2005 Cherry FLHTCSE2 "Obsession"

    • CVO1: 05 FLHTCSE2
    • Metal Dragon
Re: Cold Oil in 2007 110 Roak King - Measurement Help ?
« Reply #1 on: September 27, 2009, 08:30:04 PM »
just fine, if you run it higher it may get some blowby (oil out the air cleaner) as long as you are not it is fine.
Logged

Two Wheels

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 78
Re: Cold Oil in 2007 110 Roak King - Measurement Help ?
« Reply #2 on: September 28, 2009, 11:21:17 AM »
great, thank you.  Good to know.  All Ive really ever had is the inline fours ...
Logged
 

Page created in 0.233 seconds with 24 queries.