Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2 3 ... 10  All

Author Topic: Cycle Rama 575 Cams, TTS And Fullsacs Dyno Sheet, Updated With SuperTrapp's.  (Read 56922 times)

0 Members and 1 Guest are viewing this topic.

jimp

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 421

09 CVO SERG


I installed the Cycle Rama 575 cams with FS 1.75" baffles with no cat, and we used the TTS software. Numbers came out power 101.1 and 115.6 torque. It definitely woke the motor up and cooled it down. No more motor noise also at lower RPM, its amazing.



Cycle Rama 575 cams

Intake   Open  15        Close  35      .575 lift   230 duration  100LC   22 degree overlap   105.5 LSA
Ex.      Open   49       Close  7         .560 lift  236 duration   111LC



Blue is stock. 86.9 - 107.3

Red is Cycle Rama 575 cams, Fullsac 1.75 baffles, cat less pipe using Master Tuner. 101.1 - 115.6

Green, we removed the Fullsac's baffles and installed SuperTrapp FatShot Slip-0n's. 103.9 -118.1



« Last Edit: February 22, 2010, 07:18:30 AM by jimp »
Logged

StreetDog

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 407

    • CVO1: 2016 FLHXSE RED STREET GLIDE
    • CVO2: 2010 FLHXSE SPICED RUM
    • CVO3: 2007 FLHRSE3 RAZOR RED
Re: CR575 Cams, TTS And Fullsacs
« Reply #1 on: October 03, 2009, 10:15:43 PM »

Who makes the CR...cams ? My guess would be CycleRama. :confused5:
Logged

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: CR575 Cams, TTS And Fullsacs
« Reply #2 on: October 04, 2009, 09:25:02 AM »

Jim     Did Wes use the stock pushrods and stock head gasket?  Thanks Doc
Logged

jimp

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 421
Re: CR575 Cams, TTS And Fullsacs
« Reply #3 on: October 04, 2009, 10:04:35 AM »

Jim     Did Wes use the stock pushrods and stock head gasket?  Thanks Doc


Aftermarket on the PR, stock head gasket.
Logged

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: CR575 Cams, TTS And Fullsacs
« Reply #4 on: October 04, 2009, 10:08:36 AM »

Thanks.   Doc
Logged

jimp

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 421
Re: CR575 Cams, TTS And Fullsacs
« Reply #5 on: October 06, 2009, 03:58:03 PM »

« Last Edit: December 20, 2009, 09:41:00 AM by jimp »
Logged

Daddy-O

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Re: CR575 Cams, TTS And Fullsacs Dyno Sheet
« Reply #6 on: October 09, 2009, 11:02:38 AM »

I installed the CR575 cams with FS 1.75" baffles with no cat, and we used the TTS software. Numbers came out power 101.1 and 115.6 torque. It definitely woke the motor up and cooled it down. No more motor noise also at lower RPM, its amazing.

When I get a scanned copy I will post it.

CR575

Intake   Open  15        Close  35      .575 lift   230 duration  100LC   22 degree overlap   105.5 LSA
Ex.      Open   49       Close  7         .560 lift  236 duration   111LC

Logged

Ohio phil

  • C-YA
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 294
Re: CR575 Cams, TTS And Fullsacs Dyno Sheet
« Reply #7 on: October 12, 2009, 06:08:09 AM »

I just installed thunderheader sert 100hp 118tq thats on a 2009 serg
Logged

StreetDog

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 407

    • CVO1: 2016 FLHXSE RED STREET GLIDE
    • CVO2: 2010 FLHXSE SPICED RUM
    • CVO3: 2007 FLHRSE3 RAZOR RED
Re: CR575 Cams, TTS And Fullsacs Dyno Sheet
« Reply #8 on: October 13, 2009, 10:04:46 PM »

Did you use the 575 cams?
Logged

Ohio phil

  • C-YA
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 294
Re: CR575 Cams, TTS And Fullsacs Dyno Sheet
« Reply #9 on: October 14, 2009, 05:59:57 AM »

Kingdog
Mine is stock 255 cams, C-YA Phil
Logged

jimp

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 421
Re: CR575 Cams, TTS And Fullsacs Dyno Sheet
« Reply #10 on: October 16, 2009, 08:40:19 AM »

I just installed thunderheader sert 100hp 118tq thats on a 2009 serg


post the chart  :worthless:
Logged

jfh

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 679

    • CVO1: FLTRSE3
Re: CR575 Cams, TTS And Fullsacs Dyno Sheet
« Reply #11 on: October 18, 2009, 10:15:03 AM »

I just installed thunderheader sert 100hp 118tq thats on a 2009 serg

Now that's a happy dyno!  ;)
Logged
Hammer - CVO Member #641

2009 FLTRSE3: Axtell jugs, JE forged flat top pistons, S&S 585 cams, SE 58mm TB, Dewey's Pro-Street porting, SE cam plate, Zipper's tapered pushrods, Cat-less, 2" Fullsac, TTS, Twin Jagg oil coolers, AK-20, 13" Works Black Trackers w/ARS, Clearview, Hawg Wired, Yaffe Monkey Bars, Danny Gray Big Seat

jimp

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 421
Re: CR575 Cams, TTS And Fullsacs Dyno Sheet
« Reply #12 on: October 20, 2009, 05:37:20 PM »

Now that's a happy dyno!  ;)


I wanted to see his torque curve.
Logged

CVO MIKE

  • Newbie
  • *
  • Offline Offline
  • Posts: 38

    • CVO1: 2010 cvo FATBOB
Re: CR575 Cams, TTS And Fullsacs Dyno Sheet
« Reply #13 on: October 21, 2009, 06:56:26 PM »

I dont think those numbers are far off.My 2010 fatbob v&h big shots  with big city baffels TTS tuner 99 horse 114 torque
Logged

jimp

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 421
Re: CR575 Cams, TTS And Fullsacs Dyno Sheet
« Reply #14 on: October 24, 2009, 08:27:09 AM »

Before and after.

« Last Edit: December 20, 2009, 09:41:49 AM by jimp »
Logged
Pages: [1] 2 3 ... 10  All
 

Page created in 0.143 seconds with 25 queries.