www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All

Author Topic: Progressive 440's vs Works Performance shocks on a SEEG2  (Read 9226 times)

0 Members and 1 Guest are viewing this topic.

porthole

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 10768
  • Welcome to the Machine

    • CVO1: 2005.3217-45 FLHTCSE2
    • Porthole II
Re: Progressive 440's vs Works Performance shocks on a SEEG2
« Reply #15 on: October 18, 2009, 10:24:28 PM »
Quote from: 103tHunDer on October 18, 2009, 10:11:38 PM
Well, maybe not on you ... but between his review and Jeff's (Black Diamond) I'm going to bite the bullet on a set for the FXR3.  And if I like 'em on it, the SERG will probably be next. :2vrolijk_21:


But the FX looks like it still has the stock shocks - so that would be expected  :2vrolijk_21:
Logged
:fireman: Duane  :fireman:


MV 2013

1982 LowRider * 1974 XLCH * 1972 Adnoh
You can't control the weather, only how you deal with it

jfh

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 679

    • CVO1: FLTRSE3
Re: Progressive 440's vs Works Performance shocks on a SEEG2
« Reply #16 on: October 26, 2009, 04:34:00 PM »
After being beat up on my 12" Progressive 440s I switched to 13" Works Billet Black Street Trackers on my '09 SERG3.  After adjusting the pre-load, the 13" Works had the same ride height as the 12" Progressives, but significantly more travel resulting in a much better ride. They are keepers!
Logged
Hammer - CVO Member #641

2009 FLTRSE3: Axtell jugs, JE forged flat top pistons, S&S 585 cams, SE 58mm TB, Dewey's Pro-Street porting, SE cam plate, Zipper's tapered pushrods, Cat-less, 2" Fullsac, TTS, Twin Jagg oil coolers, AK-20, 13" Works Black Trackers w/ARS, Clearview, Hawg Wired, Yaffe Monkey Bars, Danny Gray Big Seat

Black Diamond

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3363

    • CVO1: 11 FLHXSE2 "Vanessa"
    • CVO2: 08 FLHRSE4 "Lexi" "Bike from Hell"
    • CVO3: 02 FLHRSEI "Ruby"
Re: Progressive 440's vs Works Performance shocks on a SEEG2
« Reply #17 on: October 26, 2009, 04:40:21 PM »
Quote from: hdfr120 on October 26, 2009, 04:34:00 PM
After being beat up on my 12" Progressive 440s I switched to 13" Works Billet Black Street Trackers on my '09 SERG3.  After adjusting the pre-load, the 13" Works had the same ride height as the 12" Progressives, but significantly more travel resulting in a much better ride. They are keepers!

I agree!  :drink:

JW
Logged

Highjagger

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2523
  • tradition`s not worship ash but pass on the fire

    • CVO1: FXSE Breakout Pro Street 2016 ,- and 2011 Crossbones FLSTSB ,- and 2016 LowRider s FXDLs
Re: Progressive 440's vs Works Performance shocks on a SEEG2
« Reply #18 on: December 10, 2009, 01:47:37 AM »
Quote from: hdfr120 on October 26, 2009, 04:34:00 PM
After being beat up on my 12" Progressive 440s I switched to 13" Works Billet Black Street Trackers on my '09 SERG3.  After adjusting the pre-load, the 13" Works had the same ride height as the 12" Progressives, but significantly more travel resulting in a much better ride. They are keepers!
Sounds good , but i doubt and hesitate because of the 75K miles service , no service here in germany .  :(
Logged
Success is to stand up one more than to fall down
Pages: 1 [2]  All
« previous next »
 

Page created in 0.23 seconds with 24 queries.