Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2 3 ... 6  All

Author Topic: Goal 95-100 HP & 115-120 TQ  (Read 24676 times)

0 Members and 1 Guest are viewing this topic.

Zinister

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 256

    • CVO1: 2009 FXSTSSE3
Goal 95-100 HP & 115-120 TQ
« on: October 27, 2009, 02:19:20 AM »

I'm looking at V&H 2-2 Big Radius pipes, a dyno tune (SERT?), and a bolt in cam.

Is this easily doable and does anyone have suggestions on which bolt in cam. This in in a 110B so no high revs, I want power in the cruising RPMs.


Thanks for any ideas and/or suggestions.
Logged

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6709

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: Goal 95-100 HP & 115-120 TQ
« Reply #1 on: October 27, 2009, 02:25:41 AM »

115/105 with just pipes /  A/C and Freedom YB14sec07 cam.   Check with the mod Marty his dyno is around here. (110mofo)

Back in 07 my 110 ultra was 116/104 with rinehart true duals and A/C and this same cam.  Dyno is in the ultra section

So i think its doable / close to what you are asking for.
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

Zinister

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 256

    • CVO1: 2009 FXSTSSE3
Re: Goal 95-100 HP & 115-120 TQ
« Reply #2 on: October 27, 2009, 02:29:22 AM »

I forgot to mention this is a 2009 CVO Springer so it also has the AC already from the factory.

I was also looking at getting the QQT baffles for the pipes.
Logged

MKW

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 658
Re: Goal 95-100 HP & 115-120 TQ
« Reply #3 on: October 27, 2009, 03:28:41 AM »

I'm looking at V&H 2-2 Big Radius pipes, a dyno tune (SERT?), and a bolt in cam.

Is this easily doable and does anyone have suggestions on which bolt in cam. This in in a 110B so no high revs, I want power in the cruising RPMs.


Thanks for any ideas and/or suggestions.
I have S&S 585 gear driven cams in my 2003 95CI motor.  Great crusing power but lack that low end torque.  Overall, pretty happy with the build but would like a better mid range cam.  If you like the cruising power this is a good one.  I get 95HP at 4500-5000 RPM range.  No need to downshift when I want to pass on the highway.  I'll post the dyno when I get back to TX.
Logged
2010 CVO Street Glide
2014 CVO Limited

aka_Matt

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 96
Re: Goal 95-100 HP & 115-120 TQ
« Reply #4 on: October 27, 2009, 06:06:07 PM »

HQ500 cam would wake it up alot... don't wanna go to big with the stock 9.1 compression...
Logged
2004 XL1200C: Blue/Flames, Chrome Everything, 2-1 Rinehart, Mid-Controls, 17" Deuce Wheel, And More... For Sale

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3124
Re: Goal 95-100 HP & 115-120 TQ
« Reply #5 on: October 27, 2009, 07:08:45 PM »

The 110s are pipe picky
That pipe is a power killer IMO, sorry to say. Some that will work Thunderheader, stock softail headpipes and Cycle Shack 1 3/4 tapers, Basanni Road Rage or Pro Streets just to name a few. No cam will fix the pipe issue and in fact as the overlap increases the bad pipe manifests itself
Logged

redtwin

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 181
    • FL

    • CVO1: FXR-4
    • CVO2: FXSTSSE
    • CVO3: 2010 ROADDGLIDE
Re: Goal 95-100 HP & 115-120 TQ
« Reply #6 on: October 27, 2009, 09:14:41 PM »

In my 07 springer i used the andrews 55 cams reinhardt 2-1 pipe,105/120 w/sert
Logged

maddog110

  • Newbie
  • *
  • Offline Offline
  • Posts: 47
Re: Goal 95-100 HP & 115-120 TQ
« Reply #7 on: October 27, 2009, 09:48:59 PM »

Dont put a ugly thunderheader on a bike like that! Yes it will make more power but, it will not make you happy to look at the total package. The 2-2s are great looking and sounding pipes-worth a couple ponies, IMO!!!
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3124
Re: Goal 95-100 HP & 115-120 TQ
« Reply #8 on: October 27, 2009, 10:22:10 PM »

Would agree on the TH plus they have a chrome problem and chintzy shields.
Logged

Zinister

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 256

    • CVO1: 2009 FXSTSSE3
Re: Goal 95-100 HP & 115-120 TQ
« Reply #9 on: October 28, 2009, 08:39:33 PM »

I think I'mvery limited on the pipes. I can't find many for an '09 Springer. I really don't like the looks of the 2-1 pipes so I might suffer a little for looks.


Don't most people see low 90's HP withjust a tune and V&H 2-2? I wasn't looking for much more from the cam. Is it the TQ that will suffer the most from these pipes?
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3124
Re: Goal 95-100 HP & 115-120 TQ
« Reply #10 on: October 28, 2009, 10:32:36 PM »

We need to build as much torque in the 2-4k range as we can and a pipe that is not scavenging and is very open is a candidate to create reversion in that range when the cam is not stock (more overlap) is used. The stock headpipes have a very good design when coupled with Cycle Shacks if you like the 2 into 2 look.
Logged

Zinister

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 256

    • CVO1: 2009 FXSTSSE3
Re: Goal 95-100 HP & 115-120 TQ
« Reply #11 on: October 28, 2009, 10:40:44 PM »

What kind of slip on mufflers would you use? I wouldn't mind a set of Screaming Eagle brand if they would fit/work with this cam.

Which cam is it? Is there a catalytic converter in my pipes and should I remove it if there is?
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3124
Re: Goal 95-100 HP & 115-120 TQ
« Reply #12 on: October 29, 2009, 12:05:38 AM »

Your bike has the SE255 which is very mild
Take a look here
The tapered mufflers work very well

http://www.cycle-shack.com/cycle/agora.cgi?cart_id=6354137.14374*ma7lG1&product=2007&user4=Slip-Fit%20Mufflers
Logged

Zinister

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 256

    • CVO1: 2009 FXSTSSE3
Re: Goal 95-100 HP & 115-120 TQ
« Reply #13 on: October 29, 2009, 02:35:10 AM »

Dewey what cam do you recomend? Would you invest in the Screaming Eagle cam plate with the new bolt in cam?


Sorry so many questions but a I've read allot of your comments and you seem to be pretty knowledgeable about engine builds.

I read the posts about below this one about the results from the cam and fullsac install. Kinda looks like what I'm after power wise.
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3124
Re: Goal 95-100 HP & 115-120 TQ
« Reply #14 on: October 29, 2009, 08:56:25 AM »

As a bolt-in cam I would run one of a few:
Woods TW5-6, high peak torque and lots of midrange punch (2-4k torque rise)
S&S 570 or 585 depending on if the compression is raised, little more HP little less punch
Remember that the cam is not going to be the saver, the part that brings everything home, just assists.
The pipe and tune will need to be spot on. If so I see no reason why you can not reach your goal and more, of course with headwork even easier and the torque range is extended.
Logged
Pages: [1] 2 3 ... 6  All
 

Page created in 0.239 seconds with 25 queries.