Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[TIF2]

Let me know how they work out, I'll probably get a set as well.

If you never want to remove them, then use 3M™ Yellow Super Trim Adhesive 08090 ($16 for 19oz).
Once that stuff is stuck ... it's REALLY stuck!!

3M™ Super 77 might be another solution and may allow for removal if desired.
I've used the 08090 on a lot of stuff and when it's cured it would probably destroy the carpet material (if you tried to remove the liners) before the glue bond would break.

[mjb765]

Please post if and how  the removable luggage fits in the bags once the liners are installed. I may have to go the glue route.

[fxstbharley2008]

Guys sending my check out on SAT.
I will post how I make out.
I will try to get picts posted also, when I get my puter back
Dave

[CVOTequila]

Does anyone have the ice chest bag from HD for the saddlebags?

[fxstbharley2008]

My Skinner liners are here.
I will be working on them this weekend.
I will let you know how I make out!
Dave

[Myko]

Thanks Dave, love to hear how this works out fit wise

[fxstbharley2008]

Hope the picts show!
Guys This first pict is for 1 saddle bag
The first thing I did was to seperate the pieces, then put them in to the bag to fit them.

[fxstbharley2008]

This pict is the complete kit.
In the foreground is the pieces for the 2nd bag.
Note:
You must take your time and have paitence.
First I seperated the pieces then started to fit them and trim them.
I saved the trim pieces to use on the bottom.
The piece for the lid fit great.
The pieces for the 2 large sides fit great, the pieces for the 2 small sides needed trimming or cuts put in them.
I think it took me about 6 hrs to do everything.
The first day I seperated and trimed
Once I trimed the liner for One bag I put the pieces that I trimmed on top the of the pieces for the second bag and trimmed those piece (put the piece on top of the other piece the opposite way - ie: felt to felt)
Save your trimed pieces.

[fxstbharley2008]

The smaller pieces are pieces I trimmed.
These 3 pieces are going to be the bottom.

[fxstbharley2008]

This is a finished bag
Putting in the pieces.........
I started with the steep side
Follow his instructions.........
I suggest you have 3 - 4 pairs of thin latex gloves
First put you piece in with out any glue then plan your other pieces so you know what you are about to do.
Wipe the entire inside with alcohol. let dry
spray the entire inside with 3M trim adhesive ( make sure it is Auto trim adheasive)
spray the back of the piece you are putting in.
Now the fun
You need to get this piece all the way in to the bottom in the correct postion.
I smoothed and pressed everything in with the end of a small chrome ratchet.
You may have to remove it a couple of times before U get it right
plus it sticks to every place you dont want it to and so does your hand and arm.
Once you get it in go to the next piece - do it all over  ect......

[fxstbharley2008]

Last picture
When you get to you second side it goes a bit quicker.
The kit is not perfect,
Don Skinner needs to make the bottom piece wider if someone were to order he will fix that problem if you ask him.
Im happy with the way mine turned out - not perfect but almost..
Any questions just ask
Dave

[TIF2]

Nice job on the install and thanks for posting up the pics!!
Does the kit come with liners for the lids as well?

Thanks again for posting this up.

[fxstbharley2008]

Guys the kit does come with the liner for the lids,
and this piece fits perfect.

[mjb765]

Thanks for taking the time to post with all the pics--very informative

[Myko]

How's the fit for the removable liners/luggage bags that came with the SESG after installation of the liners?
Thanks for posting the pics!