Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Cvostu]

just need a part number for an 04 seeg throttle/clutch line insulated clamp that holds these cables to the right side of the neck next to the gas tank. Long story but mine is now missing. It is screwed to the bike with a wellnut and a fine thread screw and a washer. 3 cable lines pass thru easily..  thanks

[Twolanerider]

There are two clamps on the right side of the frame.  One shows to be riveted and the other bolted in place.  69318-02 is the clamp farther forward and bolted in place.  #10076 is a little farther back and shows being riveted on.

[Cvostu]

Thanks. Its the one most forward. I'll try that. It's fairly large too. Thanks. Almost shaped like the letter D..

[Cvostu]

Part #10076 seems to be a pretty small clamp.  What wiring is held in place with that clamp? I do see that does get rivited to the frame.

[grc]

See if the attachment helps.


Jerry

[Cvostu]

Jerry- thanks for the diagram....  I know you have an 05 and I have the 04,,, can u take a picture of that area so I can possibly see how that are should look??   that would be a huge help... thanks  Stuart

[Twolanerider]

Jerry- thanks for the diagram....  I know you have an 05 and I have the 04,,, can u take a picture of that area so I can possibly see how that are should look??   that would be a huge help... thanks  Stuart

Here's an 05 Stuart.  The riveted part is farther back and beneath the tank.

[Cvostu]

I still didn't quite see that rivited on clamp... maybe it's on the 04's only?   But if you do have it,  it seemes kind of small.. that large wire harness won't pass thru that one,, I don't think..   oh well...I have cable ties

[Twolanerider]

I still didn't quite see that rivited on clamp... maybe it's on the 04's only?   But if you do have it,  it seemes kind of small.. that large wire harness won't pass thru that one,, I don't think..   oh well...I have cable ties

You can't see it without removing the tank.  Idle and throttle cables go through that clamp just before they turn downhill to the throttle body.

[Cvostu]

Ahh.   So that's it then.  I knew I could count on you Don.  Thanks alot.