Nifty! What will not be red? 
What motor framistat(s) do you need? Full blown geergeezerflaw or framistic items..
I bumble onto things sometimes....sort of.....well I know a guy.....
What won't be red? Have to think about it for a second... I wanted splashes of chrome to punctuate the red. Didn't want all red, all the time and everywhere.
The wheels are 100 spoke chrome with blackwalls.
The legs are red and the nacelle and headlight ring are red. But they're punctuated with chome caps from a glush mount axle, chrome "Yafteburner" slider covers and chrome handlebars and switch housings.
The dash is the standard chrome 02-03-07 SERK dash. Still not sure what speedo will be in it yet. Just know it won't be the stock speedo on the handlebar cover.
The engine case, cylinders and tranny case are silver. The lifter blocks and pushrod tubes are the chrome billet ball milled pieces that Harley has offered. Inner and outer primary are chrome. The drivetrain will be surrounded by red rocker boxes, cam cover (but not a red timer cover), tranny top cover and tranny side cover.
Swingarm is red as are the blocks and little round block covers. The axle is chrome on the ends as is its hardware. Lindby chrome crash bars front and rear. The old Harley fog light housings mounted with internal wiring on the front crash bars. Front turn signals not on the handlebars but on chrome Street Glide signal bars on the side of the red nacelles. The lights are the flamed bullet housings that came in the flamed light housing accessory kit Harley used to offer.
Chrome stealth luggage rack (useless but decent look) on the rear over the fender. So the small turn signal bar on the bottom with the license plate below it. Chrome motor mount brackets top and bottom and engine struts.
Lord knows how much crap I'm not thinking of right now. Lots of small parts that are red.
Author
Topic: New 02 Brandywine SERK -- Long Term Project (Read 244132 times)