www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 95 upgrade ready  (Read 2002 times)

0 Members and 1 Guest are viewing this topic.

nidan

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1416
  • Keep the breeze between your knees

    • CVO1: 02 FWDWG3 Stage IV 95 -sold
95 upgrade ready
« on: January 05, 2006, 08:47:11 AM »
Finally have the parts to do my 95" upgrade. [smiley=huepfenjump3.gif] Initially I was disappointed that the 02 and prior CVO's weren't "Screamin Eagle's"  but the research has been educational and fun. I wanted to keep as much HD as possible even though there are higher performance pieces available.  As I rarely ride over 4500 and usually lower this is what I ended up with :

SE 95" cast flat tops /cylinders
SE performance heads, w Cometic 0.30"
SE adj pushrods
Andrews TW31G with gear drive
Mikuni HSR 42
Dyna TC-88-2 ignition

I already had the stage I with SE II slip-ons

I went with the 31G as it handles the compression better than the 37G, same lift , and comes on a bit sooner.  Steve at GMR Performance was a a big help , he has built several of these. I got my cams from him, he sells Woods as well and the Revolution nikasil kits (98") .

I'll post the dyno when I get it on the road and broken in
Logged
CVO -'02 FWDWG3 Stage IV 95 -sold
'07 FLHX Stage II 103 95hp/111lbs ft
'09 FJR 1300- 145hp /99 lbs ft
2011 Mustang GT 412hp/390 lbs ft

OTIS

  • MEMBER # 806
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 978
  • Global President Hillbilly Rocket Riders

    • CVO1: 05 CVO Banana
    • CVO2: 06 CVO V-Rod
Re: 95 upgrade ready
« Reply #1 on: January 05, 2006, 11:32:23 PM »
Quote
Finally have the parts to do my 95" upgrade. [smiley=huepfenjump3.gif] Initially I was disappointed that the 02 and prior CVO's weren't "Screamin Eagle's"
Logged
Fastest member of Hillbilly Rocket Riders

nidan

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1416
  • Keep the breeze between your knees

    • CVO1: 02 FWDWG3 Stage IV 95 -sold
Re: 95 upgrade ready
« Reply #2 on: January 06, 2006, 09:02:13 AM »
The 01 CVO Road Glide was a 95" Screamin Eagle.

The stock FXDWG2/3 were TC88's . The 95" Screamin Eagle came along with the Deuce in 03.
« Last Edit: January 06, 2006, 09:05:38 AM by nidan »
Logged
CVO -'02 FWDWG3 Stage IV 95 -sold
'07 FLHX Stage II 103 95hp/111lbs ft
'09 FJR 1300- 145hp /99 lbs ft
2011 Mustang GT 412hp/390 lbs ft

jeepster09

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
  • FLHRSEI.ORG
Re: 95 upgrade ready
« Reply #3 on: January 11, 2006, 11:34:27 PM »
I built pretty much the same combo, it dyno'd at 96 horse and 96 torque. Very fun to ride....
Logged

nidan

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1416
  • Keep the breeze between your knees

    • CVO1: 02 FWDWG3 Stage IV 95 -sold
Re: 95 upgrade ready
« Reply #4 on: January 13, 2006, 09:08:48 AM »
Hey Jeepster , thanks for the reply over on the HD tech forum and welcome aboard

How many miles do you have on the build?
Logged
CVO -'02 FWDWG3 Stage IV 95 -sold
'07 FLHX Stage II 103 95hp/111lbs ft
'09 FJR 1300- 145hp /99 lbs ft
2011 Mustang GT 412hp/390 lbs ft

jeepster09

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
  • FLHRSEI.ORG
Re: 95 upgrade ready
« Reply #5 on: January 13, 2006, 09:21:47 PM »
I have 5000 miles on build. I went to 31G cam to get away from pinging with 37G cam. 31G likes high compression ratio. My motor has 10 1/4 to 1. The 31 pulls from around 2200 to 6200 rev limiter.
 [smiley=vrolijk27.gif]
Logged
 

Page created in 0.117 seconds with 20 queries.