Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1] 2 3  All

Author Topic: Polished Stainless Bolts (Transformation Kit)  (Read 10014 times)

0 Members and 3 Guests are viewing this topic.

Ed45

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 209

    • CVO1: 2010 FLHTCUSE5 Burnt Amber/Hot Citrus
Polished Stainless Bolts (Transformation Kit)
« on: December 21, 2009, 09:52:25 AM »

I have switched out the galvanized stock bolts in previous bikes with polished stainless and am considering doing the same for the SEUC on order. Dealer switch-out is expensive (labor) but they will replace those involving the mods they will be doing (cams/exhaust). I will then do the remainder I can access and save the rest for subsequent shop work hoping to eventually get them all replaced. Have many of you swapped them out? I personally don't like the silver of galvanized against the chrome. I know its a detail but that's just me. Thanks
« Last Edit: December 21, 2009, 10:42:32 AM by Ed45 »
Logged

Buy early

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 8679
  • My future if I were Benjamin Button

    • CVO1: 2001 FXDWG2 Switchblade - The Beast
    • CVO2: 2004 FXSTDSE2 Deuce - Beauty
Re: Polished Stainless Bolts (Transformation Kit)
« Reply #1 on: December 21, 2009, 09:58:04 AM »

Have switched out a few and put hot toppers on the rest.
Logged

Chains

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 8463
  • 2006 FLHTCUSE
    • FL

Re: Polished Stainless Bolts (Transformation Kit)
« Reply #2 on: December 21, 2009, 01:22:48 PM »

Went with the hot toppers, a lot less time than breaking all the bolts loose and risking a leak.
Logged
2009 FLHTCUSE
12 inch Monkey bars
Stage one kit
Fullsac SS titanium coated DX dual pipe
Kuryakyn 4 inch Mellow Crushers
Color Matched Bushtec Turbo 2
1st Active member of the CVO Critter Gawkers Society

emt364

  • Newbie
  • *
  • Offline Offline
  • Posts: 36

    • CVO1: 2009 Road glide
Re: Polished Stainless Bolts (Transformation Kit)
« Reply #3 on: December 21, 2009, 01:56:47 PM »

also did hot toppers
Logged
Mickey Harler

SERK3

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1380

    • CVO1: 07 FLHRSE3
Re: Polished Stainless Bolts (Transformation Kit)
« Reply #4 on: December 21, 2009, 02:35:19 PM »

Hot Toppers here also  :2vrolijk_21:
Logged
07 SCREAMIN EAGLE ROAD KING, RAZOR RED WITH GOLD FLAMES
V&H DUALS WITH HI-OUTPUT SLIP-ONS, ZIPPERS THUNDER MAX w/AUTOTUNE, NESS BIG SUCKER, LED TURN AND BRAKE LIGHTS. FARING, HARD BAGS & KING TOUR PAK.
LIVE EASY, RIDE HARD

Hoist!

  • Monster
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 21634
  • This chit ain't ROCKET SCIENCE!!!!

    • CVO1: '07C FLHRSE3, BLACK ICE OF COURSE, CUSTOM 110" TC 6-SPEED +++, "CYBIL"!!!
    • CVO2: '99 FXR3 BRIGHT & DARK CANDY BLUE W/FLAMES, STAGE II 80" EVO 5-SPEED +++, "JOY"!!!
    • CVO3: 4: & 5: '85 FXWG BLACK w/CUSTOM FLAMES, 110" EVO 6-SPEED +++ CVO style!!!; '08 NSMC PROSG CUSTOM FXR BASED PRO STREET BLACK, 89" EVO 5-SPEED, VERY FAST!!!; '09 NSMC HSTBBR CUSTOM RIGID HOISTBOBBER, SILVER METALFLAKE BATES SOLO SEAT & TIN w/BLACK WISHBONE FRAME, 80" EVO (w/Shovelhead bottom end) 4-SPEED! VERY COOL!!!
Re: Polished Stainless Bolts (Transformation Kit)
« Reply #5 on: December 21, 2009, 02:57:41 PM »

12 point ARP Polished SS for just about everything on Cybil! So far I've resisted and left Joy alone! ;)

Hoist! :coolblue:
Logged
"We wanna be free to ride our machines without being hassled by The Man!"

Traxxion Dynamics Suspension Rules! "It ain't braggin' if you can back it up!"

"Cause I'm sitting on top of the world!" (zoom in on satellite map in my Profile)

Trey767

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 464
Re: Polished Stainless Bolts (Transformation Kit)
« Reply #6 on: December 21, 2009, 03:19:54 PM »

Hot toppers on the 09. But when time past and this change i'll go with SS
Logged

For those who have experienced the joy, no explanation is necessary; for those who have not, no explanation is possible.

Hogtunes Front/Rear speakers
Fullsac 2.5 cores
J&M 250 Amp
Hawg Wired 6.5 lowers
Ride Time LED lights
Dakota digital dash gauges
Saddlebag extensions
Clearview windshield/vent
BigSky oil cooler fan
HD rear Envelope LED's
Zumo 665

Myko

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 380
  • Takin' Bug Slayer Home

    • CVO1: 2010 FLHXSE "BUG SLR" Spiced Rum - Yummmm!
    • CVO2: 1985 FLHTC "St Steven", RK conversion, hand paint in Naples, IT
Re: Polished Stainless Bolts (Transformation Kit)
« Reply #7 on: December 21, 2009, 08:22:25 PM »

Went ahead and bit the bullet and had the dealer do it prior to delivery of my SESG... he didn't cut me a break, but it's done...labor was slightly less than the kit ... factory bolts always bug me, especially on the CVOs.
Logged
~~~~~
Mike
------------------------------------------------------
2010 Spiced Rum SESG "Bug Slayer"
Fullsac X pipe & 2.0 baffles
Corbin Classic Solo w/Scarlet Flames
14" Wild1 Chubby Apehangers
Hawg Wired Double Shot
Kuryakyn Driving Lights
Clark Custom Windshield & Deflectors
Performance Machine FL Touring Mirrors (black)
Color matched saddlebag spoilers
Deflectorization
Diamond Polished Stainless Steel Engine bolt kit
---------------------------------------------------

cahdbiker

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 932

    • CVO1: FLHTCUSE4
Re: Polished Stainless Bolts (Transformation Kit)
« Reply #8 on: December 21, 2009, 09:03:57 PM »

I put hot toppers on my Heritage in 1995 and they still look good. I have even taken some of them off and put them back on again with no problem.They  are also on my 09SEUC. They are easy and they don't rust because they are plastic. I also found that their customer service was great. CAHDBIKER
Logged

2009 SEUC just south of Point Mugu Ventura County, Ca.

yellowhog

  • Vendor
  • Senior CVO Member
  • *
  • Offline Offline
  • Posts: 316

    • CVO1: 2005 FLHTCSE2
Re: Polished Stainless Bolts (Transformation Kit)
« Reply #9 on: December 21, 2009, 09:04:51 PM »

Hot toppers are the way to go for me.  I replaced what I could with chrome and  finished everything else with hot toppers.  Nice, clean look...withou the dirt or corrosion inside.
Logged

Keats

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2642
  • Do not be led astray

    • CVO1: 2008 FLHTCUSE3
    • CVO2: 2003 FXSTDSEI
Re: Polished Stainless Bolts (Transformation Kit)
« Reply #10 on: December 21, 2009, 09:24:56 PM »

I think this was the way to go.

I replaced all hardware with 12 pt show polished ss



http://alloyboltz.com/catalog/product_info.php?cPath=13_268_309&products_id=1785


real nice looking and no faux plastic caps
Logged
Formally FLHTCUSE3
SoA #99.9            "Never say Die"
SEST,   open A/C , dyno tuned, D&D Fatcats 2 into 1 ceramic coated, new SE CNC Ported and coated Heads with 2.120 intake valve, SE camplate,
Jims SE Crank "Darkhorsed", Timkin conversion, Andrews 54H cams, Arnott Air shocks, intimidator front valves, HID headlights, LED turn signals, Moto Lights,  Zumo 550, SE compensator.

gordy

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 423
Re: Polished Stainless Bolts (Transformation Kit)
« Reply #11 on: December 21, 2009, 10:25:25 PM »

Alloyboltz throughout my SERG.  Second bike I have done with these, never had a problem and very clean.
Logged

tirps

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Re: Polished Stainless Bolts (Transformation Kit)
« Reply #12 on: December 22, 2009, 08:44:15 AM »

I have from a few builders that you can't get better bolts to hold touque then stock, not to create oil leaks
Logged

Keats

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2642
  • Do not be led astray

    • CVO1: 2008 FLHTCUSE3
    • CVO2: 2003 FXSTDSEI
Re: Polished Stainless Bolts (Transformation Kit)
« Reply #13 on: December 22, 2009, 08:16:39 PM »

I have from a few builders that you can't get better bolts to hold touque then stock, not to create oil leaks
WTF DOES THAT MEAN?
Logged
Formally FLHTCUSE3
SoA #99.9            "Never say Die"
SEST,   open A/C , dyno tuned, D&D Fatcats 2 into 1 ceramic coated, new SE CNC Ported and coated Heads with 2.120 intake valve, SE camplate,
Jims SE Crank "Darkhorsed", Timkin conversion, Andrews 54H cams, Arnott Air shocks, intimidator front valves, HID headlights, LED turn signals, Moto Lights,  Zumo 550, SE compensator.

HOGMIKE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2378
  • 65 FLH 93" + others
Re: Polished Stainless Bolts (Transformation Kit)
« Reply #14 on: December 22, 2009, 08:33:35 PM »

Logged
HOGMIKE
Pages: [1] 2 3  All
 

Page created in 0.244 seconds with 25 queries.