Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tcb62]

I bought a set of Hot Toppers for Christmas, told the wife she did good!!!  It took about 2 1/2 hours to do the whole bike, it looks great!!

[Hogvet70]

  I am a CHR bolt person. I changed all the bolts on my '05 Heritage and will do the same on my '10 SEUC. I just wanted to get the more expensive stuff done 1st. Now I will start on the bolts.  Toppers are ok and look ok but I like the polished bolts. I never had any leaks either. They come with the locktite applied and just use your torque wrench replacing 1 at a time and you should be fine.

[spydglide]

I've got all Diamond polished SS on one bike and Alloybolz polished SS on the other......both hold torque just fine and both hold up well thru on/off procedures with no rusting as with chromed ones.  And Hot Toppers look OK but are a 'hassle' during maintenence.  The stock fasteners don't look right on a CVO....JMHO.  har.  spyder

[Hogvet70]

I've got all Diamond polished SS on one bike and Alloybolz polished SS on the other......both hold torque just fine and both hold up well thru on/off procedures with no rusting as with chromed ones.  And Hot Toppers look OK but are a 'hassle' during maintenence.  The stock fasteners don't look right on a CVO....JMHO.  har.  spyder

Thanks, I will check out the Diamond and SS. Gary

[hard10]

Thanks, I will check out the Diamond and SS. Gary

Chief (spoke to him over Christmas & they're doing fine) made an awesome spreadsheet of all the bolts needed along with cross referenced part numbers and pricing. I'll be damned is I can find it (Gary?).

[Hogvet70]

Chief (spoke to him over Christmas & they're doing fine) made an awesome spreadsheet of all the bolts needed along with cross referenced part numbers and pricing. I'll be damned is I can find it (Gary?).

:2vrolijk_21:No problem, I found the web sites for both suppliers/manufacturers. These are perfect. I believe either will be much better than the CHR. I am leaning towards Diamond right now. Thanx again. Gary

[hard10]

... (Gary?).

"Net-Ho" Gary?

[hard10]

"Net-Ho" Gary?

[Hogvet70]

Cool man! Thanx.

[Fired00d]

Chief (spoke to him over Christmas & they're doing fine) made an awesome spreadsheet of all the bolts needed along with cross referenced part numbers and pricing. I'll be damned is I can find it (Gary?).

Made me work for this one AJ ... See this post - HD Chrome Hardware Reply #38.

 
Ride Safe,
Fired00d
 

[hard10]

Made me work for this one AJ ... See this post - HD Chrome Hardware Reply #38.

 
Ride Safe,
Fired00d
 

That's why you're "the man"! I knew you could find it. My .xls file has some numbers added to it while I was making a decision on what to buy. But Hogvet will get the general idea.

[Fired00d]

"Net-Ho" Gary?

I could have went to my desktop computer and posted it again, but it was more fun searching for the original.

 
Ride Safe,
Fired00d
 

[hard10]

I could have went to my desktop computer and posted it again, but it was more fun searching for the original.

 
Ride Safe,
Fired00d
 

Practicing on warding off that CRAFT disease?

[Fired00d]

Practicing on warding off that CRAFT disease?

I've saved a lot of files that have been posted to my desktop (home) computer for times when needed but I'm on work laptop now. It is fun searching/finding stuff..... guess it's just the "investigator" in me that thrives on it.

 
Ride Safe,
Fired00d