Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[WestCoastRuss]

Has anyone found a matching floorboard for the passenger?

Nice job on the extensions also......

[Cvostu]

2"out are alot to me... I think mine are 3/4" and I now and then scrape my floorboards...  How do you avoid that when yours are 2" out?

[faceracer]

' out are alot to me... I think mine are 3/4" and I now and then scrape my floorboards...  How do you avoid that when yours are 2" out?

So far I have not had them drag. I am a pretty aggressive rider also. I live in the windy roads around here and so far so good. It feels good to have your foot on the floorboard not hangin off the front.

[Cvostu]

sounds good to me

[Sun Devil]

Any problem with the Jiffy stand being harder to put up or down?

[faceracer]

Any problem with the Jiffy stand being harder to put up or down?

I had a little learning curve to get it up!  The jiffy stand that is. Not really and issue though. 

[JCZ]

2"out are alot to me... I think mine are 3/4" and I now and then scrape my floorboards...  How do you avoid that when yours are 2" out?

Stu, the SERG doesn't sit quite as low as the SEEG.  I used to scrape my SEEG floorboards all the time but haven't scraped mine yet and only scrape Terrie's 09 Street Glide once.

[redrodo]

Face, being 1" out and 1" forward, do you know if they'll work with leg fairings?

I put the kuryakyn 1" out and 1" forward on my Ultra and like the way it rides and looks. Very simple installation.

[JCZ]

I put the kuryakyn 1" out and 1" forward on my Ultra and like the way it rides and looks. Very simple installation.

Thanks a bunch.  I may have to give those a try...........after some other mods of a higher priority.

[Sklywag]

Thanks a bunch.  I may have to give those a try...........after some other mods of a higher priority.

Other mods?  I didn't think there was anything else you could do... 

[JCZ]

Other mods?  I didn't think there was anything else you could do... 

Come on Bill.......you know it never ends.

Chrome calipers are next.  Just thinkin I've rode baggers since about 1990 without floorboard extensions.....other things still come first.

[porkypig]

Has anyone found a matching floorboard for the passenger?

Westcoast, the answer to your question is Absolutely!  If you look at my posting here:   http://www.cvoharley.com/smf/index.php?topic=43360.0
you will see that they do make the footboards for the passenger.  I had to do some mods to get some of my parts to work but yours should bolt on right out of the box.  Yours is a touring bike so you would need part # 53070-00A.  That is the chrome piece that bolts to the frame.  then the footboard pan, inserts, pins, springs, and ball bearings are all purchased separately.  I believe I have part numbers for all in my thread, but they are also on another thread for a street glide somewhere here.  That's how I got the info in the first place.  Sometimes the research is much more involved than getting the part.  Contact me in my thread and I will steer you to conclusion if you like.   After all that is said and done, (and yes, you will need a special tool to remove the mounting bolts for your rear pegs.......found that out the hard way, but then you get to add an extra tool to your collection as well.....ha!) you move your rear pegs to your crash bar and that completes the adornment.  let me know.   

[porkypig]

dang, just realized that REDRODO up above has a great picture of the pass footboards on a tourer.  Same collection.  oh, well, if you like reading, try my thread anyway.........one can never be too rich with knowledge......

[BAKRDS]

Thanks a bunch.  I may have to give those a try...........after some other mods of a higher priority.

   1" out & foreward 1" feels good except I can't get the toe of my big right foot under the brake pedal.

[faceracer]

   1" out & foreward 1" feels good except I can't get the toe of my big right foot under the brake pedal.

Thats why I went 2" out and 1" fwd.