www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: New Stone Cold Blue FXR2 owner-need some part #'s to return my bike to stock  (Read 3014 times)

0 Members and 1 Guest are viewing this topic.

panhead scotty

  • Newbie
  • *
  • Offline Offline
  • Posts: 8
New Stone Cold Blue FXR2 owner-need some part #'s to return my bike to stock
« on: January 16, 2010, 02:42:04 PM »
Hey guys,

Just picked up a 99 FXR 2 with 11,000 miles.  Want to return it to stock.  I haven't got the factory service or parts manuals yet so I need some part numbers please.

Badlander seat still available so no part number necessary
Sissy bar side plates
Mini sissy bar upright
Mini sissy bar pad
Driver footpegs
Shifter peg

Besides part numbers if anyone has any of these items they want to sell let me know.

Here is the bike as she sits.  Also has a laydown plate holder & frenched headlight trim ring but I don't mind those.



« Last Edit: January 16, 2010, 02:57:41 PM by panhead scotty »
Logged

FXR2evo99

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 983
  • LET IT BREATHHHHEEEE BABY LET IT BREATHEEEE
Re: New Stone Cold Blue FXR2 owner-need some part #'s to return my bike to stock
« Reply #1 on: April 13, 2010, 12:23:25 PM »
It's been awhile, did you get the help you needed.....if not repost again and I will help you.....but I would think by now you have figured out what you were searching for....

CONGRATULATIONS ON YOUR PURCHASE....

Regards,

Tim
Logged

fxr4mikey

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 742
Re: New Stone Cold Blue FXR2 owner-need some part #'s to return my bike to stock
« Reply #2 on: April 14, 2010, 10:39:53 AM »
Good to see you around again Tim !!!!!!!!!!

Not that I've been getting here very often in the past few months either .....

I hope to be around more often !!
Logged
2000 FXR4 Candy Tangerine
The Build -
•   SE Heads w/Cometic .030 gaskets
•   Bob Wood W6 cam
•   Mikuni HSR42 carb
•   Compu-Fire Single Fire Ignition
•   Rivera taper-lite chromolly adjustable push rods
•   Chrome lifter blocks w/HD B lifters
•   Pro-Force One AC and breather kit
•   Vance and Hines straight shots

panhead scotty

  • Newbie
  • *
  • Offline Offline
  • Posts: 8
Re: New Stone Cold Blue FXR2 owner-need some part #'s to return my bike to stock
« Reply #3 on: May 11, 2010, 04:37:55 PM »
I've got everything but the shifter peg.

Could use that part number.

Scotty
Logged

FXR2evo99

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 983
  • LET IT BREATHHHHEEEE BABY LET IT BREATHEEEE
Re: New Stone Cold Blue FXR2 owner-need some part #'s to return my bike to stock
« Reply #4 on: May 15, 2010, 04:29:47 PM »
Quote from: panhead scotty on May 11, 2010, 04:37:55 PM
I've got everything but the shifter peg.
Could use that part number.
Scotty

Scotty....

Annnnnnnnd Once again welcome to the site........

There are almost 18 part numbers from the transmission out to the shifter peg.  If you need all 18 of them I could provide them all.....but if you only need the "shifter" "peg" and that's it the number is HD# 49256-99 and that is referred to specifically as the Shift Lever Peg.  There is also HD# 3396 screw that fastens it to the Shifter Lever HD# 34599-81T.  AND THE LIST GOES ON....lol...so if you need some particulars then feel free to shout out again.

Perhaps you also need HD# 99480-99 FXR2 & FXR3 Service Manual and the FXR2 Parts Manual HD# 99426-99.

Regards,

Tim
Logged

91FXR

  • Newbie
  • *
  • Offline Offline
  • Posts: 35
Re: New Stone Cold Blue FXR2 owner-need some part #'s to return my bike to stock
« Reply #5 on: May 16, 2010, 10:49:01 AM »
bikebandit.com will list all the parts you need. Dennis
Logged
 

Page created in 0.211 seconds with 21 queries.