www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Radio issue help..  (Read 1286 times)

0 Members and 1 Guest are viewing this topic.

clegg

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 119

    • CVO1: 2000 SERG, Black & Orange. 106 stroker, 585 S&S gear driven cams, SE billet cam plate w/ SE oil pump, 52mm S&S throttle body with closed loop VFI system, Vance & Hines 2 into 1. Headwork by Leo Hess at Full Blast Engineering.
Radio issue help..
« on: January 17, 2010, 12:17:12 PM »
     I have a 2000 SERG with a radio that occasionally works great and occasionally cuts in and out very rapidly. When I slow down it is better. I have tried adjusting the auto volume feature, as well as turning it off altogether. I have replaced the speakers, and I have removed the fairing and inspected the radio and wire harness and ground. Any ideas or known problems? Maybe a known internal radio issue that can be located and soldered up? I am a mechanic and was once an avionics technician, so feel free to get technical...But also feel free to send me the "Doh! I should have thought of that!" ideas. Brainfarts happen.
Logged
Semper Fidelis

custardglide

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 225
  • AN AMERICAN IN AN ENGLISHMANS BODY


    • CVO1: FLHTKSE2
    • CVO2: FLHTCSE2 sold
Re: Radio issue help..
« Reply #1 on: January 17, 2010, 03:49:43 PM »
Hi Clegg, I'M not familiar with the RG set up here in the uk, (as we dont have that many) but do you know what make it is? Also is it going on and off under acceleration? If it is a Radio Sound stereo and it's acting up under acceleration as my 05 SEEG was doing, it turned out to be a dodgy starter relay, AND make sure the battery clamp isnt touching where the relay is. I am assuming the set up is similar to the electraglide, i.e battery and relay locations. If it is'nt, i'm talking crap and ignore this well meaning advice :bananarock: :bananarock: :bananarock:
Logged
IF YOU CAN'T SEE IT BEFORE YOU CAN HEAR IT WOTS THE POINT

BADBAGG

  • Vendor
  • Senior CVO Member
  • *
  • Offline Offline
  • Posts: 423

    • CVO1: 2009 FLTRSE3 O/B D& D Fat Cat , SE 259E Cams , High Compression Pistons , TTS Mastertune, Yaffe Monkeys bars , Yaffe Monkey engine guard , Kenwood DVD/CD radio 650 watts 7 speakers. C & C solo seat , Motorcycle Armor, Klock Werks 8" windsheild,30 tooth pulley
Re: Radio issue help..
« Reply #2 on: January 17, 2010, 07:42:44 PM »
contact ironcrossaudio.com. you can also find them in the vendor section on this site.
Logged

clegg

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 119

    • CVO1: 2000 SERG, Black & Orange. 106 stroker, 585 S&S gear driven cams, SE billet cam plate w/ SE oil pump, 52mm S&S throttle body with closed loop VFI system, Vance & Hines 2 into 1. Headwork by Leo Hess at Full Blast Engineering.
Re: Radio issue help..
« Reply #3 on: January 17, 2010, 10:22:18 PM »
Thanks for the input guys. I will check into both of those ideas. Any other input is appreciated, as I have  all winter to try everything in the book. The bad thing is I can't test any repairs until all this dam snow melts!
Logged
Semper Fidelis

Harleypingman

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1101
Re: Radio issue help..
« Reply #4 on: January 17, 2010, 11:59:31 PM »
Your radio was supplied to HD by Radio Sound.  Call and ask for customer service:  (502) 267-6768.  They are very helpful.

Logged

custardglide

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 225
  • AN AMERICAN IN AN ENGLISHMANS BODY


    • CVO1: FLHTKSE2
    • CVO2: FLHTCSE2 sold
Re: Radio issue help..
« Reply #5 on: January 18, 2010, 03:15:26 PM »
Quote from: Harleypingman on January 17, 2010, 11:59:31 PM
Your radio was supplied to HD by Radio Sound.  Call and ask for customer service:  (502) 267-6768.  They are very helpful.


Yeah, exactly what the man say's...John at Radio Sound, He's THE MAN!!!
Logged
IF YOU CAN'T SEE IT BEFORE YOU CAN HEAR IT WOTS THE POINT
 

Page created in 0.222 seconds with 20 queries.