Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Boatman]

How much could you raise the light bar before it touches the edge of the tour pak lid.



SBB

Chip-

You can only move the light/molding assy up about 1/2" until the ends with the antennaes would hit the lid.

[Old Harley Dude]

Early in this thread someone mentioned a way to convert the tour pak lights to be running, turn and brake lights.  How is that done? Talking a 2010 Ultra.

[Trey767]

Check with at ridetime.com

[grit]

The dealer refunded my money so lesson learned. ( Lt bar and liner) If I had looked closer, at the published pictures, I would have noticed the LED light bars placement in relation to the tour pak's latches and side hinges. There it's pretty obvious that the LEDs do not rap around the sides as far. My mind was so focused on the rear... Well, "REAR" is not a bad thing! 

[Grizzly]

The dealer refunded my money so lesson learned. ( Lt bar and liner) If I had looked closer, at the published pictures, I would have noticed the LED light bars placement in relation to the tour pak's latches and side hinges. There it's pretty obvious that the LEDs do not rap around the sides as far. My mind was so focused on the rear... Well, "REAR" is not a bad thing!  

Whew, that was a close one... No sense upsetting the wife, unless necessary!

When does your new bike arrive? (reply #57 & #58)