www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3]  All

Author Topic: PCIII Rev Extend  (Read 4465 times)

0 Members and 1 Guest are viewing this topic.

Screamin_Beagle

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2048
  • FLHRSEI.ORG
Re: PCIII Rev Extend
« Reply #30 on: February 27, 2006, 10:57:07 AM »
Bought mine from a guy on ebay.  Fuel Moto is the name of the place.  He's a factory rep for DynoJet and tunes em all,  from top fuel metrics to supercharged v twins.....
Paid like $280.00 and he did the first download (he has a better library than the web site...)

me thinks..

_Beagle
Logged
What ever it is that somebody did that you didn't want done.....................I either did it or had something to do with it!!!

Gordon

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
  • I love YaBB 1G - SP1!
Re: PCIII Rev Extend
« Reply #31 on: February 27, 2006, 09:17:42 PM »
Ordered new PCIII from directparts.com for $289.95 (period) delivered to my door.
Will ship tomorrow and he said I should have the end of this week.  Well, I guess I am making some headway.
Logged

Screamin_Beagle

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2048
  • FLHRSEI.ORG
Re: PCIII Rev Extend
« Reply #32 on: February 28, 2006, 11:39:15 AM »
G,
    When you get it, If you need any help with the download or firmware upgrade(depending on how long the one they send has sit on a shelf,  it may or may not have the rev extend firmware installed).  If it does not,  you'll need the kit fro Dyno ($40) for the rev upgrade.  If that's the case,  let me know,  I'll send you mine....as long as you send it back when your done.....


_Beagle [smiley=banana.gif] [smiley=cherry.gif]
Logged
What ever it is that somebody did that you didn't want done.....................I either did it or had something to do with it!!!

ggraves427

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 290
  • It's a clean machine.
Re: PCIII Rev Extend
« Reply #33 on: February 28, 2006, 01:37:37 PM »
I have already ordered and received the rev/extend kit, my PC was not a USB, ie. too old.  He said it will have the rev/extend feature already installed.  I am going to load the same map I already have because my bike really runs good.  Thank you for your offer.
Logged
2004 B&B, SEEG, Power Commander, S&S dual runner to single bore Tuned Air Induction System , D&D Performance 2 into 1 with fake left side, spoiler lights, LED lights, air horns, front fender spear, chopped tour box, in dash oil temp. guage

hdhiwayman

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 96
  • The nut between the handle bars and the saddle
Re: PCIII Rev Extend
« Reply #34 on: July 23, 2006, 03:16:53 PM »
Sorry to revive a dead thread here, but I'm having a problem with the Rev Xtend feature.  We were able to update the firmware and the software, but for some reason we are still having a problem getting with the features dialog box.  After we updated the firmware and the software, we then opened the PCIII software, my map shows up, as well as my package and all seems OK.  The instructions say to press CTRL-F, and the dialog box will appear that has the check boxes for the rev extend feature and for the start up fuel, thats what the instructions say, but when I press CTRL-F, the box appears, with nothing in it.  We have tried every different method we can think of, but we still aren't having any luck.  
Any help would be greatly appreciated.
Logged
2006 SE Autum Haze
Freedom Power package
A little bling bling
2002 Road King
Stage 2: Andrews cams w/Rineharts true duals and DFO
Too much to list
Yes I am a chromeaholic
Pages: 1 2 [3]  All
« previous next »
 

Page created in 0.211 seconds with 21 queries.