www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Disconnect of Power "ie" Pulling 40amp fuse (ALARM)  (Read 1984 times)

0 Members and 1 Guest are viewing this topic.

FUZZNUTS

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1020

    • CVO1: FLTRSE3
Disconnect of Power "ie" Pulling 40amp fuse (ALARM)
« on: April 30, 2010, 07:50:37 AM »
I'm currently installing the new J&M amp and I need to disconnect the battery to install the power for the amp. When I pull the 40 amp fuse the alarm starts screaming. I tried letting it go for 30 seconds and it just kept going on and off. So I put the fuse back in and reset the alarm with the ignition. Is there a trick to this sequence or should I let the alarm scream untill I pull the leads off the battery?.................................Fuzz 
Logged
Someday's you hit them like Jack Nicklaus and someday's like Jack Ass

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: Disconnect of Power "ie" Pulling 40amp fuse (ALARM)
« Reply #1 on: April 30, 2010, 08:02:41 AM »
Turn on the ignition and them pull the fuse, have the key fob near by.   Doc
Logged

FUZZNUTS

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1020

    • CVO1: FLTRSE3
Re: Disconnect of Power "ie" Pulling 40amp fuse (ALARM)
« Reply #2 on: April 30, 2010, 08:52:50 AM »
Thanks Doc, One question though. When I reinstall the fuse. Ignition on or off, or dose it matter?
Logged
Someday's you hit them like Jack Nicklaus and someday's like Jack Ass

ultrafxr

  • There are no sure answers, only better questions. - Dick Van Dyke
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5478
  • No problem is so small it cannot be misunderstood.
    • TN


    • CVO1: 2020 FLHTCUTG Tahitian Teal
    • CVO2: 2017 FLHTKSE Palladium Silver/Phantom Blue/Wicked Sapphire-traded
    • CVO3: 2012 FLHTCUSE7 Electric Orange/Black Diamond-traded
Re: Disconnect of Power "ie" Pulling 40amp fuse (ALARM)
« Reply #3 on: April 30, 2010, 10:22:41 AM »
Quote from: FUZZNUTS on April 30, 2010, 08:52:50 AM
Thanks Doc, One question though. When I reinstall the fuse. Ignition on or off, or dose it matter?
I cannot speak for Doc but I reinstall the maxi fuse with the ignition OFF. 
Logged



Places ridden on my bike from my driveway.
IBA member # 45520

FUZZNUTS

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1020

    • CVO1: FLTRSE3
Re: Disconnect of Power "ie" Pulling 40amp fuse (ALARM)
« Reply #4 on: April 30, 2010, 11:09:35 AM »
Quote from: ultrafxr on April 30, 2010, 10:22:41 AM
I cannot speak for Doc but I reinstall the maxi fuse with the ignition OFF. 


Thanks.............................................Fuzz :2vrolijk_21:
Logged
Someday's you hit them like Jack Nicklaus and someday's like Jack Ass

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50585
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: Disconnect of Power "ie" Pulling 40amp fuse (ALARM)
« Reply #5 on: April 30, 2010, 11:17:11 AM »
That worked here a week ago also Rich.  Travis had his bike over to add some goodies and the maxi fuse got pulled with the switch on and reinstalled with the switch off.  It worked.  It was probably just a good guess.  But it worked.
Logged

sadunbar

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11416
  • EBCM # Stealth - SSBS # 1.1 - SoA # Z&E2525 .01%
    • IL


    • CVO1: 2007 FLHTCUSE2
    • CVO2: 2000 FXR4
Re: Disconnect of Power "ie" Pulling 40amp fuse (ALARM)
« Reply #6 on: April 30, 2010, 07:55:11 PM »
Quote from: FUZZNUTS on April 30, 2010, 07:50:37 AM
I'm currently installing the new J&M amp and I need to disconnect the battery to install the power for the amp. When I pull the 40 amp fuse the alarm starts screaming. I tried letting it go for 30 seconds and it just kept going on and off. So I put the fuse back in and reset the alarm with the ignition. Is there a trick to this sequence or should I let the alarm scream untill I pull the leads off the battery?.................................Fuzz 

Pulling the leads off the battery will not stop the alarm from screaming...  The alarm has it's own battery...  I learned that the hard way a few years ago, just prior to reading the owners manual and learning how it all works....   ::) :P
Logged
2007 Screamin Eagle Ultra Classic - Light Candy Cherry and Black Ice
Screamin Eagle 120r
Revolution Performance EMS
Fuel Moto Jackpot headpipes and 4.5" Pro Touring Mufflers
HPI 55mm Throttle Body w/5.3 injectors
BDL clutch w/VPC92T
Traxxion AK-20
Legend Air Suspension
Brembo Brake Calipers/Rotors
Garmin Zumo
575 Chubby's
Bushtec Quantum

HDDOCFL

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1032
  • Never Say Never
Re: Disconnect of Power "ie" Pulling 40amp fuse (ALARM)
« Reply #7 on: May 02, 2010, 06:03:41 AM »
I reinstall the maxi fuse with the ignition off also, I always turn the igntion off after removing the maxi fuse, safty thing.  Doc
Logged
 

Page created in 0.234 seconds with 25 queries.