Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[WVULTRA]

guy:

Here's the two files I mentioned above:

TT302  http://www.box.net/shared/a5x5e4om8i

TT410  http://www.box.net/shared/qmjg3vrffl

If you don't have a TTS Mastertuner, you may want to drop by the Dealer and have them set this correctly.

HTHs.

 

[guy2507]

guy:
Here's the two files I mentioned above:
TT302  http://www.box.net/shared/a5x5e4om8i
TT410  http://www.box.net/shared/qmjg3vrffl
If you don't have a TTS Mastertuner, you may want to drop by the Dealer and have them set this correctly.
HTHs.
 

I have a race tuner kit. does it work for this idle setting?

[WVULTRA]

guy:

It's been a while since I used the older version of the race tuner.

Is your Race Tuner the older SERT or the newer SE Pro Super Tuner?

[WVULTRA]

I have a race tuner kit. does it work for this idle setting?

guy:

Just looked at my old SERT software, and Data Mode does have the ability to show Throttle Position Volts.  If you indeed have the older Race Tuner, you should be able to set the TP Volts while viewing Data Mode Recording with ignition/start-run switches on and engine not running.

Sure worth a try!

 

[guy2507]

Just looked at my old SERT software, and Data Mode does have the ability to show Throttle Position Volts.  If you indeed have the older Race Tuner, you should be able to set the TP Volts while viewing Data Mode Recording with ignition/start-run switches on and engine not running.

Sure worth a try!

 

thanks, i check my software and its possible to set the TP Volts. but i have 1 problem, i dont have a cable, so i order it at harley shop, and i try it.