Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tunedse2]

Is there anything on the market that will screw into the fender close to flush to cover the screw hole when going to a one up seat? I guess Im dreaming to think maybe something color coded???

[Fired00d]

Just a thought, and I believe something similar has been done to tour pak antenna holes.

What about a plastic/rubber plug painted with some touch up paint? Seems that would be inexpensive, and if paint starts to peel, just buy another plug and paint again.

 [smiley=pumpkin.gif]
Ride Safe,
Fired00d
 [smiley=fireman.gif]

[Fatboy]

My dealer had some little black plug with an HD script design he used the help hide mine....have you asked your dealer parts guy or service manager. I don't have any idea of a parts number.

I also bought a chrome screw in type cap from a local indepenent shop a while back again  no idea on the maker or part#.

Another thing I've used in the past is a "short" allen screw and chrome washer, then cover the allen screw head with a 'Hot Topper".

Whatever you use keep in short or it may dig into your rear tire when riding............

[MJZ]

The stealer parts counter should have 2 different choices. Both are plastic, one is chrome and the other is black. They are short (3/8 - 1/2") universal thread plug types that just screw in. If memory serves, i think they are about $2. Wait a minute, there is nothing at the stealer $2. (maybe water)

[altugo]

Hi tunedse!Check these out.http://www.x-cessories.net/custom.html [smiley=drink.gif]

[Eqcons]

Is there anything on the market that will screw into the fender close to flush to cover the screw hole when going to a one up seat? I guess Im dreaming to think maybe something color coded???

Yup, the MoFoMoCo have a part for doing just that.  It's a chrome plastic cap - looks OK.  I can't find it in the P&A Book, and although I have the packet here, the part number on it is unusual for a HD part - 762, but the description is "chrome seat nut cap".

Jim

[fatboyse2]

Or you could cover it with one of these...

[kng103]

you can use one of these.
http://www.kuryakyn.com/products.asp?bn=harley&ci=2707

[Grover]

Go to www.jpcycles.com check out the seat section for harleys. You should be able to find something there. A fender bib might be what your looking for.

Good luck,

Grover

[mhjimh]

I use a lic. plate eagle head bolt and a rubber washer from the hardware store. Look in any after market parts book for the bolt, most come with differant colored eyes.

[mhjimh]

also make sure it is a 1/4  20 bolt some are metric

[Twolanerider]

Hi tunedse!Check these out.http://www.x-cessories.net/custom.html [smiley=drink.gif]

I bought two of those at a rally last summer.

[grc]

tuned,

How about a chrome knurled cap screw, or one of the H-D tailpieces.