Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Vance & Hines Big Radius 2 into 1 questions  (Read 5262 times)

0 Members and 1 Guest are viewing this topic.

wizgee

  • Vendor
  • Newbie
  • *
  • Offline Offline
  • Posts: 49

    • CVO1: '07 FXDSE - Silver Rush / Midnight Black - GONE
    • CVO2: 13 FLHRSE5 - Crushed Sapphire / Cold Fusion
Vance & Hines Big Radius 2 into 1 questions
« on: June 17, 2010, 12:17:14 AM »

I'm considering changing my V&H 2-2 to the 2-1. According to the V&H website the big radius 2 into 1 "will not fit on the FXDSE without removing rear passenger peg."
It seems to me that I've seen quite a few Dyna's with these pipes, and it looked like all of the bikes still had the rear pegs in what appeared to be the normal mounting position.
So anybody with these pipes... What gives?
Have any challenges with the install?
What kind of power after dyno with a race tuner?
Logged

kev

  • Newbie
  • *
  • Offline Offline
  • Posts: 36

    • CVO1: FXSTSSE2 2008
Re: Vance & Hines Big Radius 2 into 1 questions
« Reply #1 on: June 21, 2010, 03:43:17 PM »

Not sure on dyna's but on my SE springer I have 2:1 V&H and the foot peg on the exhaust side is fitted a little higer than the one on the other side, Bracket for this is supplied with the Pipe.

Regards Kev
Logged

Shovelhead

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 222

    • CVO1: 2008 FXDSE, SERT, SE Heavy Breather, V & H Big Radius 2 into 1, S&S 585 gear-driven cams, Rivera tapered adjustable pushrods, H-D Oil cooler, Baker DD7, SE Compensator, SOHB Wedge Tensioner
Re: Vance & Hines Big Radius 2 into 1 questions
« Reply #2 on: June 27, 2010, 05:03:11 PM »

I have the Big Radius 2 into 1 on an '08 FXDSE, no problems , perfect fit, no modifications required. Don't have access to my dyno run printouts presently , to tell you exact gain, but it was a significant improvement.

Logged
.....started off having a great day this morning,had not been lied to or treated like a fool, then I visited an H-D dealer service dept

swat1

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 517

    • CVO1: 2007 FXSTSSE
Re: Vance & Hines Big Radius 2 into 1 questions
« Reply #3 on: July 18, 2010, 05:45:38 PM »

Have the pipe on my 07 Springer, the passenger peg relocation kit was 22.00 bucks.  Pipe has a great sound and performance.
Logged
That just happened

gaphatty

  • Newbie
  • *
  • Offline Offline
  • Posts: 45
Re: Vance & Hines Big Radius 2 into 1 questions
« Reply #4 on: July 19, 2010, 09:13:02 AM »


I had this pipe on my 2005 Fat Boy and as I recall there was a slight relocation of the right passenger foot peg required, but nothing drastic.  Very nice pipe, good sound and performance!
Logged
 

Page created in 0.231 seconds with 25 queries.