Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[valentino]

HI ,I would like to know if a 2010 96" streetglide has cats in the exhaust and if it would fit a 2010 cvo streetglide. thanks

[RedDevil]

HI ,I would like to know if a 2010 96" streetglide has cats in the exhaust and if it would fit a 2010 cvo streetglide. thanks

Yes and yes...same header pipes.  All 2010 touring rigs have cats in the collector.  Can't speak for the non-touring rigs.

[valentino]

Yes and yes...same header pipes.  All 2010 touring rigs have cats in the collector.  Can't speak for the non-touring rigs.

Thank you sir. C.Q.

[michaelbmenaker]

Yes and yes...same header pipes.  All 2010 touring rigs have cats in the collector.  Can't speak for the non-touring rigs.

I'd double check this. I thought the change in the O2 sensor size and location meant that '09 headers won't fit '10s. And, didn't the flange at the cylinder change too?
Someone here will chime in, I'm sure..

[RedDevil]

I'd double check this. I thought the change in the O2 sensor size and location meant that '09 headers won't fit '10s. And, didn't the flange at the cylinder change too?
Someone here will chime in, I'm sure..

Yep, you're absolutely right, but he was asking if the 2010 FLHX pipes would fit on the 2010 SESG.  Which they will, because they are the same pipe.  Now if he was asking to put a non-cat version of the 09 FLHX on to a 2010 SESG, then you would have the O2 sensor issue and the flange.

[sugarbear20]

Yep, you're absolutely right, but he was asking if the 2010 FLHX pipes would fit on the 2010 SESG.  Which they will, because they are the same pipe.  Now if he was asking to put a non-cat version of the 09 FLHX on to a 2010 SESG, then you would have the O2 sensor issue and the flange.

[dkflhxse]

Yep, you're absolutely right, but he was asking if the 2010 FLHX pipes would fit on the 2010 SESG.  Which they will, because they are the same pipe.  Now if he was asking to put a non-cat version of the 09 FLHX on to a 2010 SESG, then you would have the O2 sensor issue and the flange.

Copied this from another post I made.  Not sure if this helps but you can make '09 headers work on our '10 SESG's....

I have a 2010 SESG.  '09 exhaust assembly (part # 66848-09) was used with "Adapters O2 Sensor 2010 FL" (part # 1861-0594).  Dealer re-routed wiring since O2 sensors are in different location on the '09 exhaust.  Also installed a SERT and V&H Hi-Outputs.  Dyno'd at 97 HP and 113+ max torque.  Runs strong, looks and sounds great - at least to me and others who have seen/heard it.  Also mellows out at cruise so stereo w/Hog Tunes comes through loud and clear.