I have a 58278-95 FB Windshield and 58125-90B fork deflectors. They don't fit. I can not figure out how to get them on. The FB windshield brackets hit the deflectors. Are these the same parts that you used? Please help. I'm lost!
Remove the windshield.
Loosen the top windshield hardware bolt on the forks, both sides. Do not take them off just yet.
Loosen the bottom windshield hardware bolt on the forks, both sides. Do not taken off just yet.
Take the left side deflector in hand.
>>The left one is the one with the flat bracket with the three holes facing left and the top of the widest part of the blade of the deflector bend pointing toward you.<<
Take the bottom windshield hardware bolt out. Remove the hardware from the bolt. Put the bolt
and washer through the bottom bracket hole. Slide the rest of the windshield hardware onto the bolt.
Screw the bottom windshield bolt with hardware and deflector in the same hole you removed it from. Do not tighten yet.
Repeat for the top bolt hole.
Repeat for the right hand side.
Tighten all windshield hardware bolts now.
Install the windshield as it was before.
-wiz